National company signal strength meter used in some HROs and other
National radios.
price is $25.00 plus shipping.
a href="http://s820.photobucket.com/albums/zz123/sparky12x/?
action=view&current=DSCF0011.jpg" target="_blank"img src="http://
i820.photobucket.com/albums/zz123/sparky12x/DSCF0011.jpg" border="0"
alt="National Meter 2"/a

sparky wrote:
National company signal strength meter used in some HROs and other
National radios.
price is $25.00 plus shipping.
a href="http://s820.photobucket.com/albums/zz123/sparky12x/?
action=view&current=DSCF0011.jpg" target="_blank"img src="http://
i820.photobucket.com/albums/zz123/sparky12x/DSCF0011.jpg" border="0"
alt="National Meter 2"/a
Why is the meter 'zeroed' against the right peg, is it broken?
Or did National design it that way because they had a backwards meter
circuit that pulled full current with zero signal?

Why is the meter 'zeroed' against the right peg, is it broken?
Or did National design it that way because they had a backwards meter
circuit that pulled full current with zero signal?


This is a backward meter by National. The meter deflects left when
current flows.

sparky wrote:
Why is the meter 'zeroed' against the right peg, is it broken?
Or did National design it that way because they had a backwards meter
circuit that pulled full current with zero signal?


This is a backward meter by National. The meter deflects left when
current flows.

The radio must have had a backwards meter amplifier then. Weird.
Guess one could design a proper solid state amplifier to make it work,
but you'd have to 'zero' the meter at full scale with no signal.

See this picture HR)-60

http://www.universal-radio.com/CATAL...xvr/HRO60.html

it has a meter with the zero on the left.

On Dec 21, 7:39*pm, Kenneth Scharf wrote:
sparky wrote:
Why is the meter 'zeroed' against the right peg, is it broken?
Or did National design it that way because they had a backwards meter
circuit that pulled full current with zero signal?

This is a backward meter by National. * The meter deflects left when
current flows.

The radio must have had a backwards meter amplifier then. *Weird.
Guess one could design a proper solid state amplifier to make it work,
but you'd have to 'zero' the meter at full scale with no signal.

sparky wrote:
See this picture HR)-60

http://www.universal-radio.com/CATAL...xvr/HRO60.html

it has a meter with the zero on the left.

On Dec 21, 7:39 pm, Kenneth Scharf wrote:
sparky wrote:
Why is the meter 'zeroed' against the right peg, is it broken?
Or did National design it that way because they had a backwards meter
circuit that pulled full current with zero signal?
This is a backward meter by National. The meter deflects left when
current flows.
The radio must have had a backwards meter amplifier then. Weird.
Guess one could design a proper solid state amplifier to make it work,
but you'd have to 'zero' the meter at full scale with no signal.

I guess the meter will drift to the right when power is applied to the
radio with no signal.

Weird. I'm going to have to find the schematic to the HRO and figure it
out.

Kenneth Scharf wrote:
sparky wrote:
See this picture HR)-60

http://www.universal-radio.com/CATAL...xvr/HRO60.html

it has a meter with the zero on the left.

On Dec 21, 7:39 pm, Kenneth Scharf wrote:
sparky wrote:
Why is the meter 'zeroed' against the right peg, is it broken?
Or did National design it that way because they had a backwards meter
circuit that pulled full current with zero signal?
This is a backward meter by National. The meter deflects left when
current flows.
The radio must have had a backwards meter amplifier then. Weird.
Guess one could design a proper solid state amplifier to make it work,
but you'd have to 'zero' the meter at full scale with no signal.

I guess the meter will drift to the right when power is applied to the
radio with no signal.

Weird. I'm going to have to find the schematic to the HRO and figure it
out.
I meant drift to the LEFT when power is applied.

"sparky" schreef in bericht
...
See this picture HR)-60

http://www.universal-radio.com/CATAL...xvr/HRO60.html

it has a meter with the zero on the left.

On Dec 21, 7:39 pm, Kenneth Scharf wrote:
sparky wrote:
Why is the meter 'zeroed' against the right peg, is it
broken?
Or did National design it that way because they had a
backwards meter
circuit that pulled full current with zero signal?

This is a backward meter by National. The meter deflects left
when
current flows.

The radio must have had a backwards meter amplifier then.
Weird.
Guess one could design a proper solid state amplifier to make
it work,
but you'd have to 'zero' the meter at full scale with no
signal.


The AR88 had also a meter with the zero left (when there was a
meter anyway, because many had no meter at all)
It measured the cathode current of one of the IF tubes. (Less
amplification/cathode current means more signal). That leads to
the
somewhat odd 'zero right' configuration

MRe PE1NQr

I found the schematic for an early HRO
(http://www.portabletubes.co.uk/sitefiles/hro1259.djvu), it seems the s
meter is in series with the plate circuit of the last IF stage, so it
measures the plate current. At maximum signal the plate current of that
stage must be close to zero to send the meter to the 60 over nine position.

MRe wrote:
"sparky" schreef in bericht
...
See this picture HR)-60

http://www.universal-radio.com/CATAL...xvr/HRO60.html

it has a meter with the zero on the left.

On Dec 21, 7:39 pm, Kenneth Scharf wrote:
sparky wrote:
Why is the meter 'zeroed' against the right peg, is it
broken?
Or did National design it that way because they had a
backwards meter
circuit that pulled full current with zero signal?
This is a backward meter by National. The meter deflects left
when
current flows.
The radio must have had a backwards meter amplifier then.
Weird.
Guess one could design a proper solid state amplifier to make
it work,
but you'd have to 'zero' the meter at full scale with no
signal.


The AR88 had also a meter with the zero left (when there was a
meter anyway, because many had no meter at all)
It measured the cathode current of one of the IF tubes. (Less
amplification/cathode current means more signal). That leads to
the
somewhat odd 'zero right' configuration

MRe PE1NQr

On Dec 22, 8:26*pm, "MRe" wrote:
"sparky" schreef in ...
See this picture *HR)-60

http://www.universal-radio.com/CATAL...xvr/HRO60.html

it has a meter with the zero on the left.

On Dec 21, 7:39 pm, Kenneth Scharf wrote:





sparky wrote:
Why is the meter 'zeroed' against the right peg, is it
broken?
Or did National design it that way because they had a
backwards meter
circuit that pulled full current with zero signal?

This is a backward meter by National. The meter deflects left
when
current flows.

The radio must have had a backwards meter amplifier then.
Weird.
Guess one could design a proper solid state amplifier to make
it work,
but you'd have to 'zero' the meter at full scale with no
signal.

The AR88 had also a meter with the zero left (when there was a
meter anyway, because many had no meter at all)
It measured the cathode current of one of the IF tubes. (Less
amplification/cathode current means more signal). That leads to
the
somewhat odd 'zero right' configuration

MRe PE1NQr- Hide quoted text -

- Show quoted text -

Not sure one can understand the dilemma!
Lets say the meter is typically in the plate circuit of one or several
RF or IF amplifying tubes.
When the set is active and with no signal, the meter deflects (from
right to left). That type of meter is often called a 'Right zero'
meter).
When a signal is received a negative AVC voltage is generated; applied
to the grid circuits of the amplifying tubes their plate current is
reduced. The stronger the signal the greater the AVC voltage and ergo
the greater the reduction in plate current.
Hence the meter swings towards the right (or zero) in proportion to
the strength of the received signal.