Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]() "Kenneth Scharf" wrote in message ... Geoffrey S. Mendelson wrote: Kenneth Scharf wrote: Once upon a time I recall the type CK1026 GM tube. This was about the size of a 50C5 tube, but with a single pin and an aquadag coating on the outside of the tube. This tube was used in a geiger counter project that was in one of Alfred Morgan's 'boys books of radio and electronics', either the 2nd or 3rd book. There were other types of GM tubes made, but the CK1026 was one of the least expensive and was used in many simple radiation detectors. The ones used in the 1960's radiation detectors and then sold in a pack of 3 for $1 at Radio Shack in the late 1960's looked like long neon bulbs with an extra wire comming out of them. I think they were around two inches long, but it's been a long time since I've seen them. Considering that they were designed to detect levels of radiation that would only exist if you were close to ground zero and poking your head out of a shelter in the rubble of an east coast (US) city, for all I know they really were neon bulbs. :-) Geoff. You probably could use a Neon bulb as a radiation detector. You'd have to keep the tube in the dark (inside a black plastic box) and carefully adjust the voltage across the tube so it was just below the firing voltage (need a well regulated power supply). Then an alpha or beta particle might be enough to trigger the tube into conduction. The sensitivity would be determined how close to the firing voltage the bias supply was set. I recall being unconvinced when a customer complained that the neon lamp in his old, rotary disk type depth finder would not work at night unless he shined a flashlight on it. He was absolutely correct, and as time went on, we found that as all neon flash lamps (mostly NE2's and NE51's I think) grew old and weak, they required a little extra external excitation (flashlight worked ok) to light. Old Chief Lynn, W7LTQ |
Thread Tools | Search this Thread |
Display Modes | |
|
|