Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I wonder whether someone can help me to clear an issue regarding AM signals
produced by a (class-C) tube transmitter. It is well known that the peak-envelope power of a carrier 100%-modulated by a pure sine wave is four times the unmodulated carrier power. This is simply because, according to the Ohm's law, doubling voltage power gets four times higher. I would have no problem if a tube would behave like a normal resistor. But a tube instead behaves like a differential resistor, and this makes a lot of difference. If you consider the plate characteristic of a typical pentode, you see that plate current does not change much increasing plate voltage. So, doubling the plate voltage, power would not get four times higher, but just a little more that two times. The triode plate current is instead much more dependent on plate voltage so that, doubling plate voltage, power would grow probably at least three times. But definitely not four times. Can someone pinpoint what I am missing? 73 Tony I0JX |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Peak-to-peak voltage for mic input? | Equipment | |||
Peak-to-peak voltage for mic input? | Homebrew | |||
FA: MFJ 815B Peak reading Power/ SWR Meter- Reduced Price! | Swap | |||
FA: Peak Reaking SWR and Power meter | Swap | |||
NARVA Glass envelope cristals suggestions | Swap |