Le 13/07/2010 21:23, Antonio Vernucci a écrit :
Could an ART-13 owner please confirm that that radio works in this way:

- PHONE mode: when the switch is in either TUNE or OPERATE, the
dynamotor only runs when the microphone PTT or the CW key or the TEST
switch are operated. With the switch in CALIBRATE the dynamotor runs
continuously

- CW mode: whatever you do, the dynamotor runs continuously.

Thanks for your help.

Tony I0JX
Rome, Italy


Mine has the same behavior, and the technical manual says that it's the
way it works so no problem.

Furthermore it seems rather logical as in A.M. mode the H.T.s are only
required when the mike paddle is depressed... The dynamotor speed settle
time is acceptable in this mode but try to figure out the dynamotor
being turned on and off at the keying speed in CW!

Hope this helps,


Thierry
--
Pour m'ecrire, supprimer les deux _ de l'adresse mail "visible"