Looking for pin out diagram for this mic. Pse advise, tnx 73 heytubeguy

In article ,
Heytubeguy wrote:
Looking for pin out diagram for this mic. Pse advise, tnx 73 heytubeguy

EV still has data sheets available. It's basically the same pinout as
the 664 and the other dual-Z mikes.

If you want to figure it out yourself with an ohmmeter, all you need to know
is that one pin is ground, and it's tied to the case. One pin is high-Z
unbalanced out, and it's tied to the ground pin through the high-Z winding
so it'll have a few ohms between it and the shield pin. The other two pins
are the low-Z balanced out, so they will have a few ohms between them but
no connection to the shield. Knowing this, you can figure out the pinout of
ANY dual-Z mike. Find the pin tied to the case, find the pin with resistance
to it, and find the two pins with resistance between them but no connection to
the case.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."