Brian Goldsmith wrote:


There are two 1N4007 silicon diodes in an Octal base.Pin 4 is diode 1
Anode,pin 6 is diode 2 Anode and the two cathodes connect to pin 8.You
will probably have to include a power resistor of about 47 Ohms @ 10
Watts to drop the output voltage to the same value as would have been
provided by the vacuum tube rectifier.
Cheers from down under,Brian Goldsmith.


Voltage drop for a 5R4 is on the order of 67 volts at 250ma. A 47 ohm
resistor will only drop 12 volts in this example.

-Bill