| Home |
| Search |
| Today's Posts |
|
|
|
#1
November 21st 03, 01:30 AM
|
|||
|
|||
"Edmund H. Ramm" wrote in message ... Can anyone please enlighten me as to why there is an 8BN8 heated by only 6.3 instead of 8.4v, i.e. underheated by 25%, used in R2B? What forced the designers to accept cathode poisoning instead of using a 6BN8 valve? 73, Eddi ._._. -- e-mail: dk3uz AT darc DOT de | AMPRNET: If replying to a Usenet article, please use above e-mail address. Linux/m68k, the best U**x ever to hit an Atari! Somewhere buried in an old engineering text I've got a discussion of grid-leak biasing a tube with higher-than-normal resistance (2x to 5x), then reducing the filament voltage to reduce the contact potential and (I believe) the tendency of the grid to go into secondary emission and block. This was used both for noise reduction and to increase the circuit's input impedance. I'd give you details but I can't find the @$#% book right now! Is the tube grid-leak biased? Is the bias resistor significantly larger than 1M-ohm? |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS Drake TR4CW & AC4 | Boatanchors | |||
| FS Drake TR4CW and AC4 pwr supply | Boatanchors | |||
| FS Drake TR4C with Drake Mod to TR4CW | Boatanchors | |||
| FS Drake TR4C with Drake Mod to TR4CW | Boatanchors | |||
| FS: Complete Drake Station w/ extras | Boatanchors | |||
Hybrid Mode
