I don't have your origional post but thought it had a P--B-B--P
connection. P goes to one of the 6V6 plates, B-B are tied together for
CT which will be Modulator B+ connection, and the other P will be the
other 6V6 plate. The connections are the primary and for Push Pull 6V6
modulator tubes. The other connections are for the secondary and
usually have two windings which can be connected in series or parrlall
s depending on the turns ratio/Z required and feed the RF final
amplifier tube. It goes in series with the B+ lead to the final. Your
post sounded like you were looking for a Push Pull "input" for the grids
of the 6V6's? Regards, Sparks W4EAS