Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
I use a HW-101 alot. After 5-10 minutes of warm up not a problem.
For the price and being able to fix it, IMHO good rig for general rag chewing.. "-Rev Jones" wrote in message ... there are six added switches on the front panel of the second Yikes!!! Forget it at best, they are good for CAW. The VFW's on those are to mechanically and electronically unstable. If you want a Heath go for the SB-101 with a TRW built LMO "Ray Collins" *remove wrote in message ... I just received a second one off E-Bay. The first one has some problems, looks good but wired badly, audio hum, but no signal . The wiring is immaculate on the second one, the guy did a really nice job. Now the problem, there are six added switches on the front panel of the second one. Looks like W9NJG built it as his call and SS number are ingraved. I doubt if he performed the mods. Big resistor network for a dummy load is mounted inside, added resistors.(in other words a mess) Also a big muffin fan was added over the finals. The mods are the problem anybody know what they would do? One is labeled (in pencil) Lo Hi another has Spkr and I can't make out the other side. The quandry is which one to save? Raymond VA7 MGB |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Viking Invader 2000 Restoration Questions | Boatanchors | |||
Hallicrafters SX-101a - Restoration Questions | Boatanchors | |||
Restoration | Boatanchors | |||
Restoration | Boatanchors | |||
Need BC-610I parts for restoration | Boatanchors |