Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
On Tue, 9 Mar 2004 14:01:40 -0600, "Steve Nosko"
wrote: Be careful with this. I haev an ICOM 706 which I have been listening to 350kHz beacons and I suspect sensitivity is not an issue. The receive is not selective enough to keep out much noise. Steve - You suspect correctly. That is why the antenna preamp for the HP 117A VLF Comparator incorporated a magnetorestrictive 60 kHz filter with a half-power bandwidth of 30 Hz. Dale H. Cook, Chief Engineer, WWWR Roanoke VA, WCQV Moneta VA, WKBA WZZI Vinton VA, WKPA WLNI WZZU Lynchburg VA, WMNA/WMNA-FM Gretna VA http://members.cox.net/dalehcook/starcity.shtml |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Three short simple questions about antennas | Antenna | |||
Lumped Load Models v. Distributed Coils | Antenna | |||
FA: Crystal calibrator circuit board w/crystal on Ebay | Boatanchors | |||
FA: Crystal calibrator circuit board w/crystal on Ebay | Boatanchors |