Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Did you check each section of the tuning cap? In communications-style
receivers there are at least three separate sections all on a common shaft. |
#2
![]() |
|||
|
|||
![]()
Yep. I checked each one. I was hoping this was the problem, as it
would have been easy to fix. Still digging around. --arne "Jerry McCarty" wrote in message ... Did you check each section of the tuning cap? In communications-style receivers there are at least three separate sections all on a common shaft. |
#3
![]() |
|||
|
|||
![]() "arne thormodsen" wrote in message ... Yep. I checked each one. I was hoping this was the problem, as it would have been easy to fix. Still digging around. --arne I found a link at: http://www.gbronline.com/radioguy/convtr.htm That contains some general hints for troubleshooting superhet radios. Although the circuit is different, one thing caught my eye: "no reception at low end of band" --- "weak convertor tube" Sound reasonable? Should I replace the 6BE6? Which leads to another question, what's a good reputable site to by tubes from? Also, is there only one sort of 6BE6, or do I need to specify more? The tubes are the minature type, all glass. Thanks in advance. --arne "Jerry McCarty" wrote in message ... Did you check each section of the tuning cap? In communications-style receivers there are at least three separate sections all on a common shaft. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|