| Home |
| Search |
| Today's Posts |
|
|
|
#1
March 30th 05, 04:47 AM
|
|||
|
|||
I will send you a follow-up e-mail
"Doug" wrote in message ... Thanks for the info. I saw the configuration for the 28v winding in the prints. No corrosion that I can find, and nothing coming out of the trans on the 29v leads. Only possibility is that it's open at the connection point. So.....you're right, the hypersil trans would be a great addition. This is the 2 tube model, but a good amp. Onward, we'll see what he wants to do. Thanks again Doug, K7YD |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tenna Phase III schematic needed | Shortwave | |||
| Regency scanner schematic needed | Scanner | |||
| Need schematic or technical info on EBERLINE PAC-ISAGA alpha radiation meter | Equipment | |||
| Need schematic or technical info on EBERLINE PAC-ISAGA alpha radiation meter | Equipment | |||
| Kenwood TM-231A Schematic Needed for Modification | Equipment | |||
Hybrid Mode
