Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "Bill Powell" wrote in message ... On Fri, 03 Dec 2004 12:46:56 GMT, "Martin" wrote: original post snippage TenTec used to, or maybe still does, use the foam method. But as I remember it, they filled the box just halfway, then set the plastic wrapped rigs in the foam, covered it and the lower foam layer and upper sides of the box with plastic film, and poured in the top foam layer. Opened like a clam shell, easy to get out. I used the original box several times for moving the rig, and I know that the fellow I finally sold it to used it the same way. Still have my TenTec boxes up in the garage I copied the technique several times on a smaller scale for shipping fragile stuff. Marty, PLEASE - How? Bill Bill, I used those spray foam cans that they sell for replacing insulation in refrigerators after repairs and for insulating around electrical outlets that leak cold air in the winter. It was just a duplication on a much smaller scale of what I described. I've shipped some ancient Weston meters, a couple of 4-400's and several fragile optical instruments that way with no damage reported. The only problem I had was guessing how much to squirt into the boxes. Had to do a bit of trimming when it expanded too much. The boxes I used were considerably smaller than the one the TenTec came in, and I recall needing only one can for two boxes. I tried to get about 4" of foam all around. Make sure the plastic bag that you put the items in has no holes or tears; that stuff really sticks to things. Marty - K1FHR |
#2
![]() |
|||
|
|||
![]()
Martin wrote:
"Bill Powell" wrote in message ... On Fri, 03 Dec 2004 12:46:56 GMT, "Martin" wrote: original post snippage TenTec used to, or maybe still does, use the foam method. But as I remember it, they filled the box just halfway, then set the plastic wrapped rigs in the foam, covered it and the lower foam layer and upper sides of the box with plastic film, and poured in the top foam layer. Opened like a clam shell, easy to get out. I used the original box several times for moving the rig, and I know that the fellow I finally sold it to used it the same way. Still have my TenTec boxes up in the garage I copied the technique several times on a smaller scale for shipping fragile stuff. Marty, PLEASE - How? Bill Bill, I used those spray foam cans that they sell for replacing insulation in refrigerators after repairs and for insulating around electrical outlets that leak cold air in the winter. It was just a duplication on a much smaller scale of what I described. I've shipped some ancient Weston meters, a couple of 4-400's and several fragile optical instruments that way with no damage reported. The only problem I had was guessing how much to squirt into the boxes. Had to do a bit of trimming when it expanded too much. The boxes I used were considerably smaller than the one the TenTec came in, and I recall needing only one can for two boxes. I tried to get about 4" of foam all around. Make sure the plastic bag that you put the items in has no holes or tears; that stuff really sticks to things. Marty - K1FHR Lessee...how do I compare an 8 lb TenTec rig vs a 80 lb boatanchor?. Caution, folks. Much of the 'home' spray can foam will simply collapse if you place a heavy shoe on top of it. Whats good for an old VTVM or vintage knob might not play for an HT32. Would you be willing to DROP, PUNT or TOSS your package as you enter the front door of USPS/UPS/Fedex? If not, then go home and repack. -BM |
#3
![]() |
|||
|
|||
![]()
Martin wrote:
"Bill Powell" wrote in message ... On Fri, 03 Dec 2004 12:46:56 GMT, "Martin" wrote: original post snippage TenTec used to, or maybe still does, use the foam method. But as I remember it, they filled the box just halfway, then set the plastic wrapped rigs in the foam, covered it and the lower foam layer and upper sides of the box with plastic film, and poured in the top foam layer. Opened like a clam shell, easy to get out. I used the original box several times for moving the rig, and I know that the fellow I finally sold it to used it the same way. Still have my TenTec boxes up in the garage I copied the technique several times on a smaller scale for shipping fragile stuff. Marty, PLEASE - How? Bill Bill, I used those spray foam cans that they sell for replacing insulation in refrigerators after repairs and for insulating around electrical outlets that leak cold air in the winter. It was just a duplication on a much smaller scale of what I described. I've shipped some ancient Weston meters, a couple of 4-400's and several fragile optical instruments that way with no damage reported. The only problem I had was guessing how much to squirt into the boxes. Had to do a bit of trimming when it expanded too much. The boxes I used were considerably smaller than the one the TenTec came in, and I recall needing only one can for two boxes. I tried to get about 4" of foam all around. Make sure the plastic bag that you put the items in has no holes or tears; that stuff really sticks to things. Marty - K1FHR Lessee...how do I compare an 8 lb TenTec rig vs a 80 lb boatanchor?. Caution, folks. Much of the 'home' spray can foam will simply collapse if you place a heavy shoe on top of it. Whats good for an old VTVM or vintage knob might not play for an HT32. Would you be willing to DROP, PUNT or TOSS your package as you enter the front door of USPS/UPS/Fedex? If not, then go home and repack. -BM |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Does it matter about packing? | Boatanchors |