Home |
Search |
Today's Posts |
#17
![]() |
|||
|
|||
![]()
[SNIP]
=20 Oh, I don't know. The Heath HR-10 ham receiver, while admittedly in a = lesser=20 league, did this on 15 and 10 meters and admitted it. I would strongly = suspect that many of the lower end sets did this, but didn't fess-up.=20 =20 I am not sure of their rationale. Perhaps the stability of 30 MHz = oscillator is, in practice, more than twice worse than that of a 15 MHz = oscillator, so they preferred to work at lower frequency and take the = second harmonic. They did not even care to filter the oscillator = frequency so as to remove the fundamental and leave only the harmonic. By the way I put a parallel LC circuit in series with the 20 meter RF = input transformers, and, adjusting its for resonance around 9.6 MHz, the = BCs disappear completely. Adjustment is quite critical and the resulting = BCs attenuation is tremendously high. 73 Tony I0JX / K0JX |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Advice on building a 6 meter vertical antenna | Antenna | |||
Advice on SW for logging QSO and printing QSL cards. | Equipment | |||
Advice on SW for logging QSO and printing QSL cards. | Equipment | |||
Advice on SW for logging QSO and printing QSL cards. | Equipment | |||
need advice aligning a vaccum tube spectrum analyzer | Homebrew |