ts130 problems
 

Hi all,
Anyone have a ts130 with intermitant/no display problems.
Looked up mods.dk and found a supposed cure but my rig didnt share the same
problem....if anyone could shed light on this it would be appreciated. Tnx
in advance de AA9YP

ts130 problems
 

o wrote:

Hi all,
Anyone have a ts130 with intermitant/no display problems.
Looked up mods.dk and found a supposed cure but my rig didnt share the same
problem....if anyone could shed light on this it would be appreciated. Tnx
in advance de AA9YP

Try opening and reseating connectors between the display and the
main board. They go a little funny after many years. I had
this with a TS-120 and an 820!

Irv VE6BP
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/index.html
Visit my Baby Sofia website at http://members.shaw.ca/finkirv4/index.htm
Visit my OLDTIMERS website at http://members.shaw.ca/finkirv5/index.htm
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada

Hello 9yp
you might want to ask this question on
yahoo users group kenwood ts 120 130

good luck
yours truly Mac w8znx

ts130 problems
 

May be bandswitch problems. Check for looseness. I have one of these in
mobile service and every ten years i have to tighten down the board screws.


"o" wrote in message ...
Hi all,
Anyone have a ts130 with intermitant/no display problems.
Looked up mods.dk and found a supposed cure but my rig didnt share the
same
problem....if anyone could shed light on this it would be appreciated.
Tnx
in advance de AA9YP