LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Old January 19th 06, 11:22 PM posted to rec.radio.amateur.boatanchors
Don Bowey
 
Posts: n/a
Default NC-300 Calibration Question

On 1/19/06 3:58 AM, in article ,
"Cincinnati" wrote:

I am trying to complete a small adjustment of the main capacitor since all
bands are high.

I still have the question on how to adjust the oscillator coils. They all
appear to be fixed coils potted on the far end. For example T9 160 M
oscillator.

If responding direct use: hamguy (at) fuse.net


----------------------
Ron Schuster
Cincinnati, OH
----------------------



The schematics show the oscillator coils for 10 through 80 are slug tuned,
but it appears the 160M coil (T9) is not.

Do you have the manual? If not, the .pdf at the BAMA site is fairly good.

Don



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
another point of Info an_old_friend Policy 57 July 18th 05 06:19 PM
How to measure soil constants at HF Reg Edwards Antenna 104 June 25th 05 10:46 PM
SWR meter calibration question - hooked up backwards? Ken Bessler Equipment 5 November 27th 04 04:44 PM
A question about HRO 50/ HRO 60 coil interchangability............ Scott W. Harvey Boatanchors 0 February 28th 04 08:56 PM


All times are GMT +1. The time now is 09:41 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017