Equalizing resistors needed for HV diode string?

February 6th 06, 07:23 AM posted to rec.radio.amateur.boatanchors

Litzendraht

Posts: n/a

Equalizing resistors needed for HV diode string?

In my day it was not only common to use equalizing resistors across
each diode, but a .01 disc ceramic as well.

12 or 15 years ago, I built a 1KV .5 amp supply and as I recall, used
560K 1/2 watt resistors and .01 uf 1KV caps across each 1N4007. And a
"soft-start" relay in the primary of the HV transformer.

John

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RACAL RA 6790 GM Receiver	[email protected]	Shortwave	24	November 9th 11 10:24 PM
Diode and very small amplitude high frequencies signals	johna@m	Homebrew	50	February 8th 05 10:31 PM
Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?)	Jon Noring	Shortwave	103	June 30th 04 08:13 PM

All times are GMT +1. The time now is 11:42 PM.

Menu

About Us