Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
"Barry" wrote in message
... Does anyone know where I can get some small labels made for some coaxial cables? Specifically, I'm looking for something that will wrap around a 0.085" OD coax. I'm thinking these are made somewhere, but not sure where to look. I'm restoring some of the interconnecting cables in an R390A and not sure if I can fit the old, metal ones back onto the new coax. One of them had a yellow label that slipped off the old coax rather easily. I slipped it on the new coax and secured it with some clear heat-shrink tubing. I'd like to do the same for the other cables. Dymo RhinoPro 5000 http://www.hgtvpro.com/hpro/np_edito...841663,00.html they have other models |
#2
![]() |
|||
|
|||
![]()
I use the Brother "P-Touch", Model PT-1400 label maker, available from
Staples or Office Depot. Its not too expensive and has a variety of label materials. Although they appear to stay put on coax (RG-58, 214, et al)alone, I do use the clear shrink tubing retention method. I got the cue from a Telco installation team at one of our commo sites. They stuck them on and they're still there, a year or so later. de K3HVG Dymo RhinoPro 5000 http://www.hgtvpro.com/hpro/np_edito...841663,00.html they have other models |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: Coaxial Connectors, Adapters & Bulk Cable | Swap | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
FS: Connectors, Antennas, Meters, Mounts, etc. | Antenna | |||
Calculating Coaxial Cable Loss | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna |