| Home |
| Search |
| Today's Posts |
|
|
|
#1
January 13th 04, 07:58 PM
|
|||
|
|||
CRL Processing
Anyone have any tips on setting up a CRL SMC-600 Mod Controller and SPP-800
Preparation Processor? Bought these from ebay and can't for the life of me get them set up right! |
|
#2
January 14th 04, 04:54 AM
|
|||
|
|||
|
What's it intended to feed?
-- For direct replies, take out the contents between the hyphens. -Really!- "Zach and Abby Morton" wrote in message ... Anyone have any tips on setting up a CRL SMC-600 Mod Controller and SPP-800 Preparation Processor? Bought these from ebay and can't for the life of me get them set up right! |
|
#3
January 21st 04, 04:09 PM
|
|||
|
|||
|
-9 g/r...gate off...EQ 12 o'clock..operation M on the SPP800
-4 g/r...limiting +1....EQ 12 o'clock on the SMC-600 these are places to start...be careful not to overdrive the inputs.. stay with yellow peaks...not red...it's critical.... less is more, ok? what are you wanting these to do?...... is a good question... |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
