![]() |
|
Magnum Delta Force distorted SSB modulation when cold.
My radio does not like low temperature. When cold (e.g. less than 50
deg. F), the SSB modulation is bad. Its a sort of brumming noise superimposed on the audio. Strange, if I change to AM or FM, the modulation is good, under same low temperature conditions. So, it seems that the microphone is OK. What I do now is to heat the radio using a hair drier until the SSB modulation is OK. In a cold room, I need to do this every 15 minutes or so. Any ideas of what causes this, or how to fix it? Thanks, Julian |
Magnum Delta Force distorted SSB modulation when cold.
Julian wrote:
My radio does not like low temperature. When cold (e.g. less than 50 deg. F), the SSB modulation is bad. Its a sort of brumming noise superimposed on the audio. Strange, if I change to AM or FM, the modulation is good, under same low temperature conditions. So, it seems that the microphone is OK. What I do now is to heat the radio using a hair drier until the SSB modulation is OK. In a cold room, I need to do this every 15 minutes or so. Any ideas of what causes this, or how to fix it? Thanks, Julian Sounds like maybe an oscillation. In any event... this sounds like a job that will require a scope and schemetic. I don't see that you have any other choice but to take this one in for repair. www.telstar-electronics.com |
Magnum Delta Force distorted SSB modulation when cold.
On 20 Nov 2006 02:11:09 -0800, "Julian" wrote:
My radio does not like low temperature. When cold (e.g. less than 50 deg. F), the SSB modulation is bad. Its a sort of brumming noise superimposed on the audio. Strange, if I change to AM or FM, the modulation is good, under same low temperature conditions. So, it seems that the microphone is OK. What I do now is to heat the radio using a hair drier until the SSB modulation is OK. In a cold room, I need to do this every 15 minutes or so. Any ideas of what causes this, or how to fix it? Thanks, Julian Explain the word Brumming. Is it synonymous with vibrating? Superimposed or additive? |
Magnum Delta Force distorted SSB modulation when cold.
"Julian" wrote in
ups.com: My radio does not like low temperature. When cold (e.g. less than 50 deg. F), the SSB modulation is bad. Its a sort of brumming noise superimposed on the audio. Strange, if I change to AM or FM, the modulation is good, under same low temperature conditions. So, it seems that the microphone is OK. What I do now is to heat the radio using a hair drier until the SSB modulation is OK. In a cold room, I need to do this every 15 minutes or so. Any ideas of what causes this, or how to fix it? Thanks, Julian Yes, I've heard of this problem before. You're too friggen stupid to own a radio like that, so just throw it in the dumpster before the FCC fines your retarded ass. SC |
SC the CB Troll
wrote: On 20 Nov 2006 21:05:29 -0800, wrote: wrote: On Tue, 21 Nov 2006 00:55:01 GMT, Slow Code wrote: "Julian" wrote in oups.com: My radio does not like low temperature. When cold (e.g. less than 50 deg. F), the SSB modulation is bad. Its a sort of brumming noise superimposed on the audio. Strange, if I change to AM or FM, the modulation is good, under same low temperature conditions. So, it seems that the microphone is OK. What I do now is to heat the radio using a hair drier until the SSB modulation is OK. In a cold room, I need to do this every 15 minutes or so. Any ideas of what causes this, or how to fix it? Thanks, Julian Yes, I've heard of this problem before. You're too friggen stupid to own a radio like that, so just throw it in the dumpster before the FCC fines your retarded ass. you almost convince you are a busted out ham with posts like this SC SC http://kb9rqz.blogspot.com/ you wouldn't make a pimple on slow code's ass,you filthy cocksucker! funny I am one the focues of his existance and of yours run along you frigthen coward -- Posted via a free Usenet account from http://www.teranews.com http://kb9rqz.blogspot.com/ -- Posted via a free Usenet account from http://www.teranews.com **** off you dirt bag faggot |
Magnum Delta Force distorted SSB modulation when cold.
The distorsion is superimposed on voice, rather than additive. Its
like the voice becames modulated and distorted. Reducing the microphone gain does not help. As under the same conditions, the AM or FM modulation is not affected, I wonder whether the SSB modulator has a sensitive component. Explain the word Brumming. Is it synonymous with vibrating? Superimposed or additive? |
marqueer the punce troll
wrote: wrote: On Tue, 21 Nov 2006 00:55:01 GMT, Slow Code wrote: "Julian" wrote in oups.com: My radio does not like low temperature. When cold (e.g. less than 50 deg. F), the SSB modulation is bad. Its a sort of brumming noise superimposed on the audio. Strange, if I change to AM or FM, the modulation is good, under same low temperature conditions. So, it seems that the microphone is OK. What I do now is to heat the radio using a hair drier until the SSB modulation is OK. In a cold room, I need to do this every 15 minutes or so. Any ideas of what causes this, or how to fix it? Thanks, Julian Yes, I've heard of this problem before. You're too friggen stupid to own a radio like that, so just throw it in the dumpster before the FCC fines your retarded ass. you almost convince you are a busted out ham with posts like this SC SC http://kb9rqz.blogspot.com/ you wouldn't make a pimple on slow code's ass,you filthy cocksucker! -- Posted via a free Usenet account from http://www.teranews.com I PUNCE |
Magnum Delta Force distorted SSB modulation when cold.
Slow Code wrote: Yes, I've heard of this problem before. You're too friggen stupid to own a radio like that, so just throw it in the dumpster before the FCC fines your retarded ass. Slow it down mister policeman, SSB modulation is LEGAL in my country. |
Magnum Delta Force distorted SSB modulation when cold.
On 20 Nov 2006 22:03:17 -0800, "Julian" wrote:
The distorsion is superimposed on voice, rather than additive. Its like the voice becames modulated and distorted. Reducing the microphone gain does not help. As under the same conditions, the AM or FM modulation is not affected, I wonder whether the SSB modulator has a sensitive component. Explain the word Brumming. Is it synonymous with vibrating? Superimposed or additive? Most likely the voltage regulation to the vco is being compromised. |
All times are GMT +1. The time now is 05:55 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com