Aurora on 27 megs
 

Hearing many close-in stations due to the CME or Aurora. I don't recall the
last time I've heard Aurora on 27.

A.E. 352

Aurora on 27 megs
 

"A.E. 352" wrote:
Hearing many close-in stations due to the CME or Aurora. I don't recall
the last time I've heard Aurora on 27.

A.E. 352

Things sound a bit wacky over here too. See this?

http://www.space.com/scienceastronom...lar_storm.html

Aurora on 27 megs
 

Hello A.E. 352:

What does the Aurors sound like????

Supposed to hit the upper USA tonight.

Jay in the Mojave


A.E. 352 wrote:

Hearing many close-in stations due to the CME or Aurora. I don't recall the
last time I've heard Aurora on 27.

A.E. 352

Aurora on 27 megs
 

Aurora kinda' makes stations sound like they're talking underwater.
Generally, if a beam is pointed North it clears up the received audio a bit.


"Jay in the Mojave" wrote in message
...
Hello A.E. 352:

What does the Aurors sound like????

Supposed to hit the upper USA tonight.

Jay in the Mojave


A.E. 352 wrote:

Hearing many close-in stations due to the CME or Aurora. I don't recall
the last time I've heard Aurora on 27.

A.E. 352

Aurora on 27 megs
 

Jay in the Mojave wrote:
Hello A.E. 352:

What does the Aurors sound like????

Supposed to hit the upper USA tonight.

Jay in the Mojave

A.E. 352 wrote:

Hearing many close-in stations due to the CME or Aurora. I don't recall
the last time I've heard Aurora on 27.

A.E. 352



Hi Jay

It made stations sound warbled sorta like when someone has a low power
supply behind their transmitter.

Aurora on 27 megs
 

Hello A.E 352 and Steveo:

Ok that sounds like multi pathing to me! That is two or more signals of
the same station arriving at the different times to the receiver.

In FM its really bad.

I once bought a FM Broadcast Band Directional Beam Antenna. I wanted to
hear a FM Station over the hills in Santa Monica. It was KNAC heavy Rock
n Roll Station, that no one could hear.

I installed a mast next to the side of the front of the house. And
pointed the beam towards Santa Monica to hear KNAC. I could hear several
stations on the same frequency and a lot of distortion. After turning
the beam away from the Santa Monica, and towards the mountains behind my
house KNAC came in loud and clear, and full quieting, even had the
"Stereo" Light come on. But station was a disappointment.

http://www.qsl.net/n9zia/wireless/multipath.html

But I did learn about multi path.

I wonder if the radio signals are bouncing off the Aurora and having
multipath?

I know I have heard local power stations have their signal bounce off a
local atmosphere, causing back scatter, and those signals wernt strong
enough to miltipath. I think.

Jay in the Mojave

Steveo wrote:

It made stations sound warbled sorta like when someone has a low power
supply behind their transmitter.

Aurora on 27 megs
 

Jay in the Mojave wrote:
Hello A.E 352 and Steveo:

Ok that sounds like multi pathing to me! That is two or more signals of
the same station arriving at the different times to the receiver.

In FM its really bad.

I once bought a FM Broadcast Band Directional Beam Antenna. I wanted to
hear a FM Station over the hills in Santa Monica. It was KNAC heavy Rock
n Roll Station, that no one could hear.

I installed a mast next to the side of the front of the house. And
pointed the beam towards Santa Monica to hear KNAC. I could hear several
stations on the same frequency and a lot of distortion. After turning
the beam away from the Santa Monica, and towards the mountains behind my
house KNAC came in loud and clear, and full quieting, even had the
"Stereo" Light come on. But station was a disappointment.

http://www.qsl.net/n9zia/wireless/multipath.html

But I did learn about multi path.

I wonder if the radio signals are bouncing off the Aurora and having
multipath?

I know I have heard local power stations have their signal bounce off a
local atmosphere, causing back scatter, and those signals wernt strong
enough to miltipath. I think.

Jay in the Mojave

It could have very well been the multi path you are describing Jay, it does
make for some strange sounding audio for sure. Warble is the best way I can
describe it.

I just got done putting up my beam about a half hour ago and sat down for
some lunch, and of course the band is quiet over here for the time being.
Maybe we can stir 'em up later.


Steveo wrote:

It made stations sound warbled sorta like when someone has a low power
supply behind their transmitter.

Aurora on 27 megs
 

Steveo wrote:
Hello Steveo:

Tell us how the beam goes. When ya get a chance.

Jay in the Mojave


It could have very well been the multi path you are describing Jay, it does
make for some strange sounding audio for sure. Warble is the best way I can
describe it.

I just got done putting up my beam about a half hour ago and sat down for
some lunch, and of course the band is quiet over here for the time being.
Maybe we can stir 'em up later.


Steveo wrote:


It made stations sound warbled sorta like when someone has a low power
supply behind their transmitter.

Aurora on 27 megs
 

Jay in the Mojave wrote:
Steveo wrote:
Hello Steveo:

Tell us how the beam goes. When ya get a chance.

Jay in the Mojave

Hi again, Jay

It's been scary quiet over here so far but it's the same in my portable. I
did make a couple three local contacts tho, and tried both the horizontal
and vertical elements with good reports. The swr barely moves on either
too..so far so good.. I need a band opening to really try it out.

I'll leave you know via the airwaves if it's really working, Jay.

Aurora on 27 megs
 

Hello Jay

Dunno if that's you in HRHG, but 6 meters was really wild, I guess, from
what I'm hearing.

You need SSB (or possibly CW) to work it. Too much flutter otherwise. Too
much multipath (and changing constantly at that) otherwise (for FM).

Why is it that there is more intelligent conversation and discussion of more
interesting modes in the cb group than the ham group?

Curious minds and that :D


73 from Rochester, NY
Jim


"Jay in the Mojave" wrote in message
...
Hello A.E 352 and Steveo:

Ok that sounds like multi pathing to me! That is two or more signals of
the same station arriving at the different times to the receiver.

In FM its really bad.

I once bought a FM Broadcast Band Directional Beam Antenna. I wanted to
hear a FM Station over the hills in Santa Monica. It was KNAC heavy Rock
n Roll Station, that no one could hear.

I installed a mast next to the side of the front of the house. And
pointed the beam towards Santa Monica to hear KNAC. I could hear several
stations on the same frequency and a lot of distortion. After turning
the beam away from the Santa Monica, and towards the mountains behind my
house KNAC came in loud and clear, and full quieting, even had the
"Stereo" Light come on. But station was a disappointment.

http://www.qsl.net/n9zia/wireless/multipath.html

But I did learn about multi path.

I wonder if the radio signals are bouncing off the Aurora and having
multipath?

I know I have heard local power stations have their signal bounce off a
local atmosphere, causing back scatter, and those signals wernt strong
enough to miltipath. I think.

Jay in the Mojave

Steveo wrote:

It made stations sound warbled sorta like when someone has a low power
supply behind their transmitter.