Speech Processor Prototype...
 

The new speech processor prototype is working well... even if Frank
doesn't understand it... LOL
Follow it's progress at
http://www.telstar-electronics.com/d...s/WhatsNew.htm

www.telstar-electronics.com

Speech Processor Prototype...
 

"Telstar Electronics" wrote in message
oups.com...
The new speech processor prototype is working well... even if Frank
doesn't understand it... LOL
Follow it's progress at
http://www.telstar-electronics.com/d...s/WhatsNew.htm

www.telstar-electronics.com


Nice custom housing. Gonna hook it up to 120V or 240V to get that extra
swing?



Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Speech Processor Prototype...
 

wrote in message
...
On 1 Jan 2007 15:59:51 -0800, "Telstar Electronics"
wrote:

The new speech processor prototype is working well... even if Frank
doesn't understand it... LOL
Follow it's progress at
http://www.telstar-electronics.com/d...s/WhatsNew.htm

www.telstar-electronics.com

at the risk seeming stupid what is the prupose/objective of such a
device
http://kb9rqz.blogspot.com/


Seeming?



Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Speech Processor Prototype...
 

On 1 Jan 2007 15:59:51 -0800, "Telstar Electronics"
wrote in
.com:

The new speech processor prototype is working well... even if Frank
doesn't understand it... LOL


Remember when I told you how to get harmonic-free clipping? Well here
you go, Brian.... hack this and I might even buy one myself:

ftp://bama.sbc.edu/downloads/comdel/csp11/

Speech Processor Prototype...
 

wrote:
at the risk seeming stupid what is the prupose/objective of such a
device

The purpose is to hook this to a CB radio for greatly improved
modulation... from the stock dynamic or condenser mic.

www.telstar-electronics.com

Speech Processor Prototype...
 

U-Know-Who wrote:
Nice custom housing. Gonna hook it up to 120V or 240V to get that extra
swing?

LOL... You're right... the prototype enclosure is an outlet box. This
was the only steel enclosure that was handy at the time. It works well
for my proto needs.

www.telstar-electronics.com

Speech Processor Prototype...
 

Well... I should be able to get out in the mobile this weekend to try
out the new prototype on the air.
I'll be sure to let you know how it works Frank... hehehe

Track the progress of the new prototype at
http://www.telstar-electronics.com/d...s/WhatsNew.htm

Speech Processor Prototype...
 

On Mon, 01 Jan 2007 19:03:38 -0500, wrote:

+++at the risk seeming stupid what is the prupose/objective of such a
+++device
************

Increase bandwidth through splatter.

james

Speech Processor Prototype...
 

"james" wrote in message
...
On Mon, 01 Jan 2007 19:03:38 -0500, wrote:

+++at the risk seeming stupid what is the prupose/objective of such a
+++device
************

Increase bandwidth through splatter.

james

If you can find the circuit for the compression amp of a GRT21 this circuit
works great. Makes your radio sound like a used car commercial. If set up
right it can keep average sideband power up and prevent overmodulation. No
ICs and a fairly small total parts count.. IF you can find the schematic for
the GRT21 you have to be careful, there were two audio input boards. The
compressor board and a straight audio board. The transmitter used one or the
other, not both.

Speech Processor Prototype...
 

james wrote:
Increase bandwidth through splatter.

Nonsense... if the original ALC/modulation limiting is in tact within
the radio... this speech processor will not over modulate. However, it
will certainly boost your average power on AM and SSB!

www.telstar-electronics.com