LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
Old January 6th 07, 07:49 PM posted to rec.radio.cb
external usenet poster
 
First recorded activity by RadioBanter: Sep 2006
Posts: 298
Default Speech Processor Product - Your Input is Requested

On 6 Jan 2007 11:10:56 -0800, "Telstar Electronics"
wrote:

+++Please rate the importance 1-5 (1-not important to 5-very important) of
+++the following categories:
+++
+++General:
+++Importance of adding some type of speech processing to the transmitter
+++on your radio (1-5)


Zero. Since it is well documented that Audio processing has marginal
performance improvements on a amplitude signal. Thus the rest of the
survey would be no more than a "1" if applicable.

Now lets talk about an RF Speech Clipper and/or RF compressor and then
you may have something worth talking about.

james
+++Importance of being available in kit form (1-5)
+++Importance of cost below $25 (1-5)
+++Importance of cost below $50 (1-5)
+++Importance of cost below $75 (1-5)
+++Importance of a comprehensive warranty (1-5)
+++
+++Physical:
+++Importance of being light weight (1-5)
+++Importance of small size (1-5)
+++
+++Performance/Features:
+++Importance of ability to switch processor in and out of transmit audio
+++signal path (1-5)
+++Importance of not having to change batteries (1-5)
+++Importance of adjustable audio compression (1-5)
+++Importance of compatibility with condenser type microphones (1-5)
+++Importance of compatibility with crystal type microphones (1-5)
+++Importance of visible modulation indicator (1-5)
+++
+++Installation:
+++Importance of ability to install processor inside radio (1-5)
+++Importance of ease of installation (1-5)
+++Importance of ability to install processor without professional help
+++(1-5)
+++Importance of comprehensive installation instructions (1-5)
+++
+++
+++Thank you for your response. Your input will allow us to develop the
+++best possible blend of performance and features for this new product.
+++
+++www.telstar-electronics.com


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Input Bandwidth of an ADC. [email protected] Homebrew 3 September 29th 06 04:23 PM
Input stage for VHF frequency counter in an FPGA? [email protected] Homebrew 17 February 25th 06 07:20 PM
Free speech Bob Miller Antenna 0 December 11th 05 12:55 AM
How to measure soil constants at HF Reg Edwards Antenna 104 June 25th 05 10:46 PM
Here's Your Answer, Todd.... K4YZ Policy 104 May 9th 05 09:43 AM


All times are GMT +1. The time now is 08:46 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017