| Page 1 of 2 | 1 | 2 |
|
|
VoiceMax...
Trials with the newly designed VoiceMax speech processor module are
going well. I have the first "hay-wired" prototype in mobile operation for about one week now. The reports are all positive. So far, nobody believes I'm working a little crappy Cobra19 DX4 with a stock mic... except for the trucker that pulled up along side me and saw the stock mic for himself. With the proto locked-in at the maximum 15:1 compression right now... the reports I'm getting say that it's the loudest and clearest stock mic they have ever heard. Whether you're whispering or screaming... the volume level is exactly the same. Also, the noise gate feature works fantastic. It's always been a mobile operator's dream to have high audio gain without background noise... now that's possible. I plan to start laying out the first all surface mount PCB to allow the next prototype unit to be mounted inside the radio. www.telstar-electronics.com |
VoiceMax...
The VoiceMax prototype field testing continues. There are no issues at
this time. Several people have emailed me asking questions. Here are some of those answers: Currently installed in a Cobra19 DX4 with stock mic. The VoiceMax module has been set on the prototype at a fixed 15:1 compression ratio. The Cobra19's limiter pot has been adjusted so that the radio will maintain a 95% modulation envelope from a whisper... to yelling into the mic. (statement based on 2" distance from mic) The "noise gate" has been adjusted to block all sounds below an input level of 1mV from mic. At this level... and with the stock Cobra mic... it blocks all tire noise in my vehicle. Output of module has been adjusted to match the output of the stock mic. (about 40mV @ 1KHz tone) The power source for the module is derived from inside the radio and is fully regulated. The current draw is around 15mA. Attack time of the modules limiter is about 1mS. Decay time has been designed to around 500mS. I plan on starting an FAQ page out at the Telstar Electronics web site based on these... and other questions I receive. Please go to http://www.telstar-electronics.com/d...s/VoiceMax.htm to see the latest details as they become available. |
VoiceMax...
The second prototype unit has been put into mobile operation. We have
also set up an FAQ regarding this new product at http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax...
I'm attempting to finalize the feature list for the new VoiceMax
module. I'm torn between having an adjustment for the compression ratio or having a fixed value. What are your feelings? Is an adjustment pot for compression a "must"? Thanks for your input. http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax...
"Telstar Electronics" wrote in message ups.com... I'm attempting to finalize the feature list for the new VoiceMax module. I'm torn between having an adjustment for the compression ratio or having a fixed value. What are your feelings? Is an adjustment pot for compression a "must"? Thanks for your input. http://www.telstar-electronics.com/d...evelopment.htm Hahahahahahahahaha!!!! $500 for your splatterbox? "LOL" http://www.telstar-electronics.com/d...ve2879ABTC.htm Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
VoiceMax...
I'm not sure what your comment has to do with my question...
http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax...
"Telstar Electronics" wrote in message oups.com... I'm not sure what your comment has to do with my question... http://www.telstar-electronics.com/d...evelopment.htm I'm not surprised... Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
VoiceMax...
I'm not surprised...
Thanks for your comment... http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax...
On 25 Feb 2007 07:56:23 -0800, "Telstar Electronics"
wrote: +++I'm attempting to finalize the feature list for the new VoiceMax +++module. I'm torn between having an adjustment for the compression +++ratio or having a fixed value. What are your feelings? Is an +++adjustment pot for compression a "must"? Thanks for your input. +++ +++http://www.telstar-electronics.com/d...evelopment.htm **************** Hey you need the conpression man so that the CBers can crank it up and one can hear an ant fart across the room. james |
VoiceMax...
I'm attempting to finalize the feature list for the new VoiceMax
module. I'm torn between having an adjustment for the compression ratio or having a fixed value. What are your feelings? Is an adjustment pot for compression a "must"? Thanks for your input. http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax...
Thanks for your email replies. I don't blame you for not wanting to
post in this forum. The VoiceMax design is in it's final stages, and the first PC board has started layout. Please visit http://www.telstar-electronics.com/d...evelopment.htm for the latest details and scheduled release date for the new VoiceMax speech processor module. Thanks again for your help in developing this new product! www.telstar-electronics.com |
VoiceMax...
On 27 Feb 2007 04:44:33 -0800, "Telspam Electronics"
wrote in .com: Thanks for your email replies. I don't blame you for not wanting to post in this forum...... Nobody's falling for your charade, Brian. Climb out of your parents' basement and get a job already. |
VoiceMax...
Background:
Two-way radio communication relies on the modulation content contained within the signal. Maintaining a high modulation level is crucial in providing the highest possible efficiency from any transmitter operating on AM, FM, and SSB. Current two-way radios normally rely on microphones that inherently change audio levels delivered to the transmitter. This causes transmitter modulation to fluctuate greatly depending on voice level and pitch. This audio fluctuation lowers the average modulation* levels applied to the transmitter, resulting in less than optimal transmission range. *Average modulation levels for voice type transmissions are approximately 35-45% General Product Description: An electronic module that can be fitted to two-way radios that provides dynamic speech compression and limiting on transmit. The speech compression will provide a constant level (95-100%) of modulation to transmitted signals. The module will also incorporate a "noise gate" that will effectively eliminate background noise below a desired level. http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax...
On 27 Feb 2007 13:14:13 -0800, "Telspam Electronics"
wrote in . com: Background: Two-way radio communication relies on the modulation content contained within the signal. Maintaining a high modulation level is crucial in providing the highest possible efficiency from any transmitter operating on AM, FM, and SSB. Current two-way radios normally rely on microphones that inherently change audio levels delivered to the transmitter. This causes transmitter modulation to fluctuate greatly depending on voice level and pitch. This audio fluctuation lowers the average modulation* levels applied to the transmitter, resulting in less than optimal transmission range. *Average modulation levels for voice type transmissions are approximately 35-45% General Product Description: An electronic module that can be fitted to two-way radios that provides dynamic speech compression and limiting on transmit. The speech compression will provide a constant level (95-100%) of modulation to transmitted signals. The module will also incorporate a "noise gate" that will effectively eliminate background noise below a desired level. "LOL!" |
VoiceMax...
Frank Gilliland wrote:
"LOL!" Telspam Electronics ------- |
VoiceMax Speech Processor Module...
The VoiceMax project is progressing on schedule and a product release
date has been set. This date has been set on the conservative side and the product could conceivably be released sooner. I invite all of you to keep abreast of the continuing progress with this product at http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax...
Telspam Electronics ------- Telstar Rejectronics |
VoiceMax...
|
VoiceMax Speech Processor Module...
On 28 Feb 2007 10:55:31 -0800, "Telstar Electronics"
wrote: +++The VoiceMax project is progressing on schedule and a product release +++date has been set. This date has been set on the conservative side and +++the product could conceivably be released sooner. I invite all of you +++to keep abreast of the continuing progress with this product at +++http://www.telstar-electronics.com/d...evelopment.htm ************* I am waiting with such great anticipation that I can't hardly control myself. I hope it is soon so that the suspense will be over. james |
VoiceMax Speech Processor Module...
On Mar 1, 7:26 am, james wrote:
I am waiting with such great anticipation that I can't hardly control myself. I'm sorry to hear that your incontinence problem still plagues you from time to time... www.telstar-electronics.com |
VoiceMax Speech Processor Module...
On 1 Mar 2007 13:39:35 -0800, "Telstar Electronics"
wrote: +++On Mar 1, 7:26 am, james wrote: +++ I am waiting with such great anticipation that I can't hardly control +++ myself. +++ +++I'm sorry to hear that your incontinence problem still plagues you +++from time to time... +++ +++www.telstar-electronics.com ****** Not incontinence but laughter. james |
VoiceMax Speech Processor Module...
On Mar 1, 3:39 pm, "Telstar Electronics"
wrote: On Mar 1, 7:26 am, james wrote: I am waiting with such great anticipation that I can't hardly control myself. I'm sorry to hear that your incontinence problem still plagues you from time to time... www.telstar-electronics.com Well... while James mulls that over... the PCB development continues. The board is about 50% complete at this time. I expect to be done by this weekend... and have the first custom boards within two weeks. I will post a pic or two on the net as soon as I have a few built up. Follow the development of the VoiceMax Speech Processor at http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax Speech Processor Module...
"Telstar Electronics" wrote in message ups.com... On Mar 1, 3:39 pm, "Telstar Electronics" wrote: On Mar 1, 7:26 am, james wrote: I am waiting with such great anticipation that I can't hardly control myself. I'm sorry to hear that your incontinence problem still plagues you from time to time... www.telstar-electronics.com Well... while James mulls that over... the PCB development continues. The board is about 50% complete at this time. I expect to be done by this weekend... and have the first custom boards within two weeks. I will post a pic or two on the net as soon as I have a few built up. Oh goody!!! Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
VoiceMax Speech Processor Module...
"U-Know-Who" wrote:
Oh goody!!! SHAZZAM! |
VoiceMax Speech Processor Module...
"Steveo" wrote in message ... "U-Know-Who" wrote: Oh goody!!! SHAZZAM! Wazzup Mopar? Doin' ok up there in the snow? Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
VoiceMax Speech Processor Module...
"U-Know-Who" wrote:
"Steveo" wrote in message ... "U-Know-Who" wrote: Oh goody!!! SHAZZAM! Wazzup Mopar? Doin' ok up there in the snow? Yeah doing fine up here while it's colder than a well diggers ass and mounds of snow. I wouldn't have it any other way until my hair turns blue..after that I -may- be convinced that a hurricane, flood, or drought might be a better place to live out my years. We're getting ready for $pring now, everyday. Thanks for asking UKW. Everything good with you I hope? |
VoiceMax Speech Processor Module...
"Steveo" wrote in message ... "U-Know-Who" wrote: "Steveo" wrote in message ... "U-Know-Who" wrote: Oh goody!!! SHAZZAM! Wazzup Mopar? Doin' ok up there in the snow? Yeah doing fine up here while it's colder than a well diggers ass and mounds of snow. I wouldn't have it any other way until my hair turns blue..after that I -may- be convinced that a hurricane, flood, or drought might be a better place to live out my years. We're getting ready for $pring now, everyday. Thanks for asking UKW. Everything good with you I hope? All is good here...great weather...70's in the daytime, 40's overnight, family in town from all over the country, good home cooked food, etc. All in all, a very nice time here south of H-Town! I'll express you some of the weather for a fee! :-) Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
VoiceMax Speech Processor Module...
"U-Know-Who" wrote:
"Steveo" wrote in message ... "U-Know-Who" wrote: "Steveo" wrote in message ... "U-Know-Who" wrote: Oh goody!!! SHAZZAM! Wazzup Mopar? Doin' ok up there in the snow? Yeah doing fine up here while it's colder than a well diggers ass and mounds of snow. I wouldn't have it any other way until my hair turns blue..after that I -may- be convinced that a hurricane, flood, or drought might be a better place to live out my years. We're getting ready for $pring now, everyday. Thanks for asking UKW. Everything good with you I hope? All is good here...great weather...70's in the daytime, 40's overnight, family in town from all over the country, good home cooked food, etc. All in all, a very nice time here south of H-Town! I'll express you some of the weather for a fee! :-) Yeah sounds real good, UKW, were supposed to make it up to sixty degrees by weds. Time to refresh my farmer tan and freckles! check check |
VoiceMax Speech Processor Module...
On Mar 13, 6:49 am, "Telstar Electronics"
wrote: The first surface-mount printed circuit board has been finished... and is on order. One side of the board can be seen athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen... Photos of a completed board and a preliminary specification will be available at the web site within ten days. Feel free to email me if you have specific questions.... Preliminary specification is now available at http://www.telstar-electronics.com/voicemax.pdf |
VoiceMax Speech Processor Module...
On Mar 15, 7:27 am, "Telstar Electronics"
wrote: On Mar 13, 6:49 am, "Telstar Electronics" wrote: The first surface-mount printed circuit board has been finished... and is on order. One side of the board can be seen athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen... Photos of a completed board and a preliminary specification will be available at the web site within ten days. Feel free to email me if you have specific questions.... Preliminary specification is now available athttp://www.telstar-electronics.com/voicemax.pdf A complete piece of garbage made by the skokie skulker |
Biggest coward I've ever seen
|
VoiceMax Speech Processor Module...
The VoiceMax project is progressing ahead of schedule. I invite all of
you to keep abreast of the continuing progress with this product at http://www.telstar-electronics.com/d...evelopment.htm or see the latest preliminary brochure at http://www.telstar-electronics.com/voicemax.pdf www.telstar-electronics.com |
Biggest coward I've ever seen
On Mar 16, 6:40 am, Steveo wrote:
http://n8wwm.4t.com/index.html http://i3.tinypic.com/wiwx1d.jpg You IS a fugly felon, dogie. Why didn't you show up at Dayton? Have to work overtime in the porno store booths? AKC will be there again this year, so show yo ass, keyqueen. |
VoiceMax Speech Processor Module...
On Mar 16, 12:01 pm, "Telstar Electronics"
wrote: The VoiceMax project is progressing ahead of schedule. I invite all of you to keep abreast of the continuing progress with this product athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen... or see the latest preliminary brochure athttp://www.telstar-electronics.com/voicemax.pdf www.telstar-electronics.com GARBAGE GARBAGE GARBAGE, just like his amps. Without the Motorola RF Data Manual Griffgarbage would be even worse. Maybe you should meet mopedopuke at the next pride march and get busy doing your natural function, instead of selling garbage. |
Biggest coward I've ever seen
"coming next! Mopeydopey is outed!" wrote:
Why didn't you show up at Dayton? I went to the source first. Need a refresher? http://n8wwm.4t.com/index.html Invite me over again, go on......I double dogie dare you, you spineless ****stick. I'll rub your face on the pavement next. |
VoiceMax...
On Feb 12, 5:38 am, "Telstar Electronics"
wrote: Trials with the newly designed VoiceMax speech processor module are going well. I have the first "hay-wired" prototype in mobile operation for about one week now. The reports are all positive. So far, nobody believes I'm working a little crappy Cobra19 DX4 with a stock mic... except for the trucker that pulled up along side me and saw the stock mic for himself. With the proto locked-in at the maximum 15:1 compression right now... the reports I'm getting say that it's the loudest and clearest stock mic they have ever heard. Whether you're whispering or screaming... the volume level is exactly the same. Also, the noise gate feature works fantastic. It's always been a mobile operator's dream to have high audio gain without background noise... now that's possible. I plan to start laying out the first all surface mount PCB to allow the next prototype unit to be mounted inside the radio. www.telstar-electronics.com Brian just wanted to let you know that I heard you out on the band last night, not only were you the loudest radio but you where cyrstal clear. I think you have a real winner here with this new VoiceMax. |
Biggest coward I've ever seen
On 18 Mar 2007 04:55:36 GMT, Steveo wrote:
"coming next! Mopeydopey is outed!" wrote: Why didn't you show up at Dayton? I went to the source first. Need a refresher? http://n8wwm.4t.com/index.html Invite me over again, go on......I double dogie dare you, you spineless ****stick. I'll rub your face on the pavement next. Man-boobs !!! LOL Vinnie S. |
Biggest coward I've ever seen
Vinnie S. wrote:
On 18 Mar 2007 04:55:36 GMT, Steveo wrote: "coming next! Mopeydopey is outed!" wrote: Why didn't you show up at Dayton? I went to the source first. Need a refresher? http://n8wwm.4t.com/index.html Invite me over again, go on......I double dogie dare you, you spineless ****stick. I'll rub your face on the pavement next. Man-boobs !!! LOL Vinnie S. Fugly **** wears crisco kathy's dress. http://i3.tinypic.com/wiwx1d.jpg |
VoiceMax...
On Mar 19, 7:19 pm, wrote:
On Feb 12, 5:38 am, "Telstar Electronics" wrote: Trials with the newly designed VoiceMax speech processor module are going well. I have the first "hay-wired" prototype in mobile operation for about one week now. The reports are all positive. So far, nobody believes I'm working a little crappy Cobra19 DX4 with a stock mic... except for the trucker that pulled up along side me and saw the stock mic for himself. With the proto locked-in at the maximum 15:1 compression right now... the reports I'm getting say that it's the loudest and clearest stock mic they have ever heard. Whether you're whispering or screaming... the volume level is exactly the same. Also, the noise gate feature works fantastic. It's always been a mobile operator's dream to have high audio gain without background noise... now that's possible. I plan to start laying out the first all surface mount PCB to allow the next prototype unit to be mounted inside the radio. www.telstar-electronics.com Brian just wanted to let you know that I heard you out on the band last night, not only were you the loudest radio but you where cyrstal clear. I think you have a real winner here with this new VoiceMax.- Hide quoted text - - Show quoted text - OK. The first pcbs are scheduled to arrive tomorrow. I hope to have the first one built by the end of this weekend. I'll then install in my radio for final testing. I'll let you know when your beta-test unit is ready. http://www.telstar-electronics.com/d...evelopment.htm |
VoiceMax...
On Feb 12, 9:38 am, "Telstar Electronics"
wrote: Trials with the newly designed VoiceMax speech processor module are going well. I have the first "hay-wired" prototype in mobile operation for about one week now. The reports are all positive. So far, nobody believes I'm working a little crappy Cobra19 DX4 with a stock mic... except for the trucker that pulled up along side me and saw the stock mic for himself. With the proto locked-in at the maximum 15:1 compression right now... the reports I'm getting say that it's the loudest and clearest stock mic they have ever heard. Whether you're whispering or screaming... the volume level is exactly the same. Also, the noise gate feature works fantastic. It's always been a mobile operator's dream to have high audio gain without background noise... now that's possible. I plan to start laying out the first all surface mount PCB to allow the next prototype unit to be mounted inside the radio. www.telstar-electronics.com GARBAGE |
| All times are GMT +1. The time now is 10:05 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com