"Brainbuster" wrote in message news:3f21e055.0@entanet...
valmont wrote in message ...

Using them causes splatter to those
on legal channels.

What a load of rubbish.
Are you really as stupid as your reply suggests -
or are you just giving any
b*llsh*t in an attempt to scare someone?

"Hey outlaws: some guy promoting following the rules? Never fear,
it's Brainbuster to the rescue! His mission: making sure illegal
operators feel good about themselves! hi-ho-silver!"

Taking two examples:
Channel 3a = 26.995 MHz.
This is 10KHz from channel 3 and 10KHz from channel 4.
Channel 7a = 27.045 MHz.
This is 10KHz from channel 7 and 10KHz from channel 8.

The same 10KHz applies to all 5 of these "a" channels.
10KHz is the standard spacing between CB channels.

In the case of two locals, one on channel 3 and one on channel
3a, I'd say the one operating *illegally* on 3a will definitely create
adjacent channel interference to the one operating legally. And did
you ever stop to consider that 3a (and the other "a" channels") are
allocated for non-voice use for a *reason*? A great number of RC toys
and model enthusiasts use those frequencies, and they have a right to
use them, while keyclowns don't.

So, they will cause no more "splatter" than using any legal adjacent
channel.

Poor Brainbuster and Twisty. You can't say that voice operation
on those channels is not illegal so all you can do is try to refocus
on semantic word games.

Brainbuster.

Brain Busted is more like it.....back to Birmingham with you.