Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
don wrote in message . ..
a co-worker of mine has an emporer ts-5010 the backlights for the lcd display quit working,,,,again these burned out a few years ago,,and he had them repaired in tenessee at a shop he found,,it only set him back 30 bucks so this time he takes it to litchfeild radio here in ohio and the guy doesnt even pop the top claims he cant fix it,parts no longer available so he turns to me seems like a simple fix took guy in tenesse a matter of minutes do any of you know of a part number for replacement lights for this or a source for them thanks in advance don Hi. The bulbs used in such radios may be either 6 or 12 volts. 6 Volt types are connected as pairs in series. These bulbs are also used in car stereos here in the UK, and are easily found in electronic component stores here. You could try such shops, but be aware that the bulb length should not be too great... some are longer than others. I find it hard to believe that, if it is a faulty bulb, a shop cannot get one anywhere. Regards, Peter. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Why are so many defending the proposed automatic upgrade from Tech to General? | Policy | |||
New ARRL Proposal | Policy | |||
Why did the FCC merge the Tech and Tech Plus classes in 2000? | Policy |