| Home |
| Search |
| Today's Posts |
|
#17
|
|||
|
|||
|
On Tue, 28 Oct 2003 23:10:42 GMT, "BuckEye" wrote:
I agree to all of the above except a 1/4 wave is a 1/4 no matter what. A so called loaded 1/4 is a loaded antenna not called a 1/4 anymore. Once a antenna has been shortened by any means, shorter than the physical 1/4 wave antenna ( 1/4 wave including the velocity factor ), top hats, loading coil, or ant other ways it is not clamed to be called a 1/4 wave anymore. I did say 1/4 whip on the post, as most everybody should have known it to be the 108" antenna. I don't know where Doc is heading for with his statement, but a shortened antenna ( like the Xterminator) is 1/4 wave "electrically" Velocity factor isn't a factor when you determine antenna length, except certain antennas that are made from transmission line. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Doppler DF whip length | Antenna | |||
| Ohio/Penn DX Bulletin #649 | Dx | |||
| Ohio/Penn DX Bulletin #649 | Dx | |||
| Effect of whip diameter on resonant frequency | Antenna | |||
| Hygain 18AVT/WB Parts Traps, 80m coil whip etc. | Antenna | |||