| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
Hrm.. ever stop to think that maybe the wire helically wound around
the shaft might be 1/4 wave long? That would make it a 1/4 wave helically loaded antenna. Just because the physical length of the antenna is less than 1/4 wave at the desired frequency doesn't mean the antenna isn't. Don't believe me? Try looking up "folded dipole" on the 'net.. -SSB BuckEye wrote: What the hell do you think I am saying. This all started when some dumass said a antenna was electrically 1/4 wave long, not 1/4 wave antenna. You either have a 1/4 wave antenna or you don't. If its shorter, then its not a 1/4 wave antenna. In most cases it loaded, and no more electrically a 1/4 wave long antenna. How hard is this to understand. I think this comes from some adds that's states it a helical loaded 1/4 wave antenna that is only 56" long which is bull . Just like some other adds that claim their antenna is a 5/8 antenna wound on a fiberglass rod only 5' tall now go figure, I guess some also believe this . "'Doc" wrote in message ... BuckEye, But all antennas are 'matched', be they exactly a 1/4 wave length long, or 75 feet long, or 1 inch long. I'm assuming that you mean impedance matching, right? Impedance matching has nothing to do with an antenna being resonant. 'Doc |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Doppler DF whip length | Antenna | |||
| Ohio/Penn DX Bulletin #649 | Dx | |||
| Ohio/Penn DX Bulletin #649 | Dx | |||
| Effect of whip diameter on resonant frequency | Antenna | |||
| Hygain 18AVT/WB Parts Traps, 80m coil whip etc. | Antenna | |||