Home |
Search |
Today's Posts |
#1
|
|||
|
|||
RCI 2950 Clarifier/RIT not working
Hi all.
Looking for some help or tips on my Ranger RCI 2950. The recieve clarifier doesn't work till the radio has been on for 1/2 an hour. This makes SSB impossible to use, because I can't make anyone audible. It seems to be stuck at one end, i.e 1khz too high, till in begins to work, and then sits at 12:00, with SSB audio perfectly acceptable. To me, this would indicate a failing variable resistor on the front panel, i.e broken track till it gets warm. I have rigged an external variable to try and prove this, but to no avail. I'd appreciate any suggestions as to why this may occur. I have searched back through google groups to see if the problem has been reported before, but it doesn't seem to. When the radio is warm, and the clarifier then works, the radio is usable for about 1/2 an hour, and then the tx frequency drifts a little. Luckily I have some understanding operators nearby who have spent the time talking to me while continuously adjusting their rx clarifiers. The radio drifts on tx by about 2khz. The drift is not continuous, but moving all the time. Crystal frequencies are constant, and main Voltage regulator has just been changed. Apparently there is another voltage regulator which I need to check, to ensure PLL voltage is constant? Help please!!!! Radio is RCI2950 early version, 7 years old, with no mods from new apart from putting it on 11 MTRs. Had new finals this year (routine maintenance)new volume control, plus display bulbs. Otherwise very reliale. 73s Joe Landy Peterborough UK. P.S I'm stuck using a President Lincoln till it's fixed. Great radio, but a nightmare in the car, no memories, and no illuminated buttons for night-operation. Can't use up/dn buttons on UK band either! Cheers. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
TR-9130 is working! | Boatanchors | |||
REPLY>>>any/all mods for the RCI 2950. | General | |||
siro827 5/8 wave cb ant tuned to 10 meters working on 20 meters | Antenna | |||
Interest Check Highly Modded 2950 | CB | |||
2950 receive amp | CB |