RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   CB (https://www.radiobanter.com/cb/)
-   -   Mystery Button on Cobra 41 Plus? (https://www.radiobanter.com/cb/30578-mystery-button-cobra-41-plus.html)

Josh December 14th 03 09:28 PM

Mystery Button on Cobra 41 Plus?
 
I bought a used Cobra 41 Plus CB, without the manual. The first
pushbutton on it is labeled NB. What exactly is this? I can't tell
that it does anything when it's pushed.

Also, the mic for the 41 Plus is a smaller DIN-type connector with 5
or so small pins. Do they make adaptors which will allow me to
connect a regular 4-pin mic connector to the 41 Plus?

Finally, what is the Dynamike control supposed to do?

Dave or Debby December 14th 03 09:43 PM

It is the Noise Blanker (gets rid of electrical noises from power
wires and the air. There ain't no mystery to this!

An extension cord adaptor can be made to convert your 4 pin to the 5
pin din. Dynamic is a MIC GAIN--leave all the way up.
Dave!

On 14 Dec 2003 13:28:27 -0800, (Josh) wrote:

I bought a used Cobra 41 Plus CB, without the manual. The first
pushbutton on it is labeled NB. What exactly is this? I can't tell
that it does anything when it's pushed.

Also, the mic for the 41 Plus is a smaller DIN-type connector with 5
or so small pins. Do they make adaptors which will allow me to
connect a regular 4-pin mic connector to the 41 Plus?

Finally, what is the Dynamike control supposed to do?




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Steveo December 15th 03 04:53 PM

Dave or Debby wrote:
It is the Noise Blanker (gets rid of electrical noises from power
wires and the air. There ain't no mystery to this!

An extension cord adaptor can be made to convert your 4 pin to the 5
pin din. Dynamic is a MIC GAIN--leave all the way up.
Dave!

Leaving it all the way up (mic gain) can cause it to sound like ****, and
make it pick up way too much background noise. Try to keep it as low
as you can, test it with a friend a few miles away from you.

Donald Sherwood December 17th 03 09:59 PM

To bad your not in my neck of the woods I could convert that radio to a
standard 4 or 5 Pin connector.

As for Mic Gain, it is used to increase the signal (Your Voice) to the
radio. Just like a Car audio amp Gain, it is not a volume control. If it is
truely a Gain circuit, cranking the gain will usally induce alot background
noise or may feedback.

"Josh" wrote in message
om...
I bought a used Cobra 41 Plus CB, without the manual. The first
pushbutton on it is labeled NB. What exactly is this? I can't tell
that it does anything when it's pushed.

Also, the mic for the 41 Plus is a smaller DIN-type connector with 5
or so small pins. Do they make adaptors which will allow me to
connect a regular 4-pin mic connector to the 41 Plus?

Finally, what is the Dynamike control supposed to do?





All times are GMT +1. The time now is 07:15 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com