| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
I have a Uniden PC122 in a '92 Nissan Sentra. When the electric fans kick
on, there is enough noise to cover up the low signals. I have tried running power from the fuse box and the battery. The power ground is only a foot long or so. The chassis is grounded next to the radio. The antenna is on the trunk and has an SWR of 1.05:1 on channel 28 and isn't higher than 1.2:1 on any channel. Transmit and receive are what they should be other than the noise. I'm thinking I should try capacitors in the fan motor? Chris |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Noise Figure Measurements | Homebrew | |||
| The Apollo Hoax FAQ | General | |||
| signal to noise ratio drops on connecting the antenna | Homebrew | |||
| signal to noise ratio drops on connecting the antenna | Homebrew | |||
| Automatic RF noise cancellation and audio noise measurement | Homebrew | |||