LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Old October 5th 04, 06:19 PM
Dave Hall
 
Posts: n/a
Default

On Tue, 5 Oct 2004 11:04:33 -0400, (Twistedhed)
wrote:

From:
(Dave*Hall)
On Mon, 04 Oct 2004 18:34:23 GMT, sideband wrote:
Twistedhed wrote:
You would be best served putting your voodoo radio bull**** to rest.
Assuming a peak and tune job is somehow related to increased "S" units
is imbecilic.
Twist:
Actually, there is a correlation.

He knows that. He just likes to insult me.


Nothing was insultive was said to you in the above post.


Really? It's funny, when someone even remotely suggests that you're
opinions are off the mark, you accuse them of "getting personal", yet
you don't seem to apply the same consideration when you refer to
advice as "voodoo bull****".


But


he's way out of his element and way too far
into mine if he wants to talk about radio
theory.



Hehe,,,,that's the davie we're all used to, the one that needs to blow
his own horn.


If the shoe fits. In all likelihood, I've probably forgotten more
about the technical aspects of radio than you know now.


It ilustrates your blown self-esteem. I guess if I was as
ignorant as your remarks about FCC law that hold roger beeps illegal and
dxing as a felony,


Deny all you want. DXing IS illegal, and roger beeps were at one time
considered in the same vein as other noisemakers as devices to amuse
or entertain.

I would hurry up and start tooting my own horn about
another area of which I have slightly more knowledge than that of the
law which governs "your" element.


I understand the law well enough. At least I'm not blatantly
disregarding it.

Nevertheless, tuning a 4 watt radio will not affect any "S" unit on the
receiving end. You go on and believe it will and continue to sling your
voodoo bull**** that is found in your posts from your claim of making a
Davemade "spectrally pure" (something which you are unable to define,
but claim you did) to your bull**** about increased S units from a 4
watt radio.



Are you THAT literal? Are you disputing my claim because you're hung
up on the absolute definition of a "4 watt radio"? The term "4 watt
radio" in this context, refers to a stock (legal) CB. If you peak the
radio, of course it will no longer put out 4 watts, otherwise why do
it? The truth is (a truth that you're either too anally specific about
or unable to comprehend) that if you double your transmit power, you
increase your signal by 3db. A typical "S" meter is "calibrated" in
6db increments. Therefore, assuming a linear (no not the amplifier)
scale, an increase of 6 db (1 "S" unit) is the equivalent of taking a
4 watt carrier, and increasing it to 16 watts. Something that is not
possible from a simple "peak job".

There's nothing "voodoo" about it. But don't take my word for it.
Check out some books on radio propagation, and read it for yourself.



Dave
"Sandbagger"
http://home.ptd.net/~n3cvj

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Some questions form a RDS's newbie Bruce Sam Broadcasting 2 October 1st 04 03:48 AM
Yaesu FT-790R user manual? Rob Hanson Equipment 0 February 23rd 04 12:31 AM
Newbie abr Homebrew 20 September 29th 03 04:07 PM
Newbie abr Homebrew 0 September 28th 03 06:46 PM
User manual needed for Standard GX 1510 VHFRadioBuff Equipment 0 August 22nd 03 05:12 AM


All times are GMT +1. The time now is 04:06 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017