Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
On Tue, 05 Apr 2005 07:47:13 -0400, Dave Hall wrote:
On Mon, 04 Apr 2005 17:53:15 -0400, Vinnie S. wrote: OK, I purchased the Imax-2000 which is a 5/8 wave antenna. There are 2 options for a ground plane kit: 1. First is a four fiberglass 6 foot radials, angled down (appears 45 degrees), as seen he http://www.durhamradio.com/s/custome...at=1684&page=1 2. This is another kit. It has four aluminum 7 foot radials. This is horizontal, and not angeled, as seen he http://www.majestic-comm.com/product...rsupply/Boomer Which one would be better? You should give Frank's suggestion a look as it does contain a lot of information on antennas. But to answer your question, your particular type of antenna, like the A-99, is designed to decouple with no radials. Adding radials to this type of antenna does very little to improve performance. It's more about marketing hype than actual performance improvement. I should have been clearer. I wasn't trying to improve performance, since it is a 5/8. But from the reading I have done (no thanks to anything Frank posted), I was simply seeing if thise would lower the angle of radiation, and reduce potential for any king of interference. I am sorry id my lack of knowledge in this field, insults Frank. Vinnie S. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Tuning a ground plane | Antenna | |||
Grounding Question | Antenna | |||
Grounding Rod | Shortwave | |||
Ground and static protection question | Shortwave | |||
RF in shack and ground question | Equipment |