Hello All:

Looking for a moonraker 6 any condation.

Jay in the Mojave

boom too short, element spacing all wrong...would make a good 4 element
beam if you did it all properly.

On Sat, 28 May 2005 05:28:09 -0700, Jay in the Mojave
wrote:

Hello All:

Looking for a moonraker 6 any condation.

Jay in the Mojave

Why? so you can steal the design? like you did the rest of them
antennas you build?

;-P

-Chuck

Chuck wrote:
On Sat, 28 May 2005 05:28:09 -0700, Jay in the Mojave
wrote:

Hello All:

Looking for a moonraker 6 any condation.

Jay in the Mojave

Why? so you can steal the design? like you did the rest of them
antennas you build?

;-P

-Chuck

STFU you fat maggot.

Steveo wrote:
Chuck wrote:

On Sat, 28 May 2005 05:28:09 -0700, Jay in the Mojave
wrote:


Hello All:

Looking for a moonraker 6 any condation.

Jay in the Mojave

Why? so you can steal the design? like you did the rest of them
antennas you build?

;-P

-Chuck


STFU you fat maggot.
second that motion...

quad is lot better

Steal? If you have evidence that someone has stolen something it is
your duty as a phoney Christian and citizen to report them. Perhaps you
could provide some proof of someone stealing a design and tell the
original designer about it, Chukkee-Sukkee.

Since it is known that you are a liar, you have again proven that you
are a false Christian. You have told a lie and borne false witness.

You are one messed up nutjob, Chukkee-Sukkee.

Just looking for the elements and such.

Do not need the Boom, Hubs, Boom to Mast Plate, or the Gamma Matches
that break all the time. I have new billet aluminum hubs made to fit a
stronger 2 inch boom, and a better boom to mast plate. And the Fiber
glass rod truss will be replaced with a better nylon rope multiple truss
system. And the matching system will upgraded to a lower loss matching
system.

The last moonraker I got, had almost all the hubs broke!

I am rebuilding a Moonraker 6 for a friend. Will have a much stronger
Boom and Hubs. Since these old moonraker beams worked so well the guy
wants it bullet proofed! Since you will need a tower and a heavy duty
rotor why add a little weight and make it last another 40 years or more.
I should have photos if I can find the elements to save some money.

Jay in the Mojave


Jay in the Mojave wrote:
Hello All:

Looking for a moonraker 6 any condation.

Jay in the Mojave

I hear ya man.... the new one's ain't nearly as good as the older
ones... FWIW, I was kidding about the design stealing....

-Chuck




On Mon, 30 May 2005 08:18:39 -0700, Jay in the Mojave
wrote:

Just looking for the elements and such.

Do not need the Boom, Hubs, Boom to Mast Plate, or the Gamma Matches
that break all the time. I have new billet aluminum hubs made to fit a
stronger 2 inch boom, and a better boom to mast plate. And the Fiber
glass rod truss will be replaced with a better nylon rope multiple truss
system. And the matching system will upgraded to a lower loss matching
system.

The last moonraker I got, had almost all the hubs broke!

I am rebuilding a Moonraker 6 for a friend. Will have a much stronger
Boom and Hubs. Since these old moonraker beams worked so well the guy
wants it bullet proofed! Since you will need a tower and a heavy duty
rotor why add a little weight and make it last another 40 years or more.
I should have photos if I can find the elements to save some money.

Jay in the Mojave


Jay in the Mojave wrote:
Hello All:

Looking for a moonraker 6 any condation.

Jay in the Mojave

Blow it out your schnozz, phoney Christian. You try to make people
think you are Christian but you threaten people with guns. What a loop
de loop you are, sissy boy.