Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
I don't know if it is the same or not but I would recommend that it be
checked out to see what the wattage going out is and what the modulation is doing. I picked up a Realistic and it was only putting out 2.46 watts and about 50% moduclation and would not get out at all. I started with a single no-name Huslter copy, went to single Hustler, twin Hustler, to twin Tram Penetrators and really never made one whit's difference in getting out. I bought a Uniden, he put in on the meters, turned watts to 4, mods to 100% and it'll blow the doors off of rigs within 8-10 miles if that roar is not in there. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Knwd TS-830S Alignment Question/Problem (PLL/VFO) | Equipment | |||
Knwd TS-830S Alignment Question/Problem (PLL/VFO) | Boatanchors | |||
Knwd TS-830S Alignment Question/Problem (PLL/VFO) | Equipment | |||
Drake R4B alignment question | Boatanchors | |||
HQ100 Alignment Procedure? | Boatanchors |