Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old June 12th 05, 04:13 PM
larry
 
Posts: n/a
Default looking for frequency synthesizer chip

Greetings..

I am looking for a frequency synthesizer chip that will have an output
anywhere from 5 mhz to 15 mhz.. or wider..

channel spacing of 1 hz...

Any thoughts?

Larry ve3fxq


  #2   Report Post  
Old June 13th 05, 03:56 AM
xpyttl
 
Posts: n/a
Default

Because of the availability of examples, the AD9850 is probably the simplest
to use. But some of the newer AD chips will give you cleaner output. They
get there with higher frequency oscillators, though, which translates into
more power. Most folks clock the 9850 at 100 or 120 MHz. Canned 100 MHz
oscillators tend to be pretty power hungry. The 9850 also gets hungry as
the clock goes up. At least some of the newer synth chips use less power,
but I don't know what you can do about 400 MHz clocks.

TI has some VHF/UHF chips that I know some folks have run as low as 50 MHz.
These use a crystal in the 20 MHz range instead of an external clock and are
pretty reasonably priced. If your objective is to go into a mixer, then you
could divide down a UHF synth to get to your 5-15 neighborhood.

...

"larry" wrote in message
...
Greetings..

I am looking for a frequency synthesizer chip that will have an output
anywhere from 5 mhz to 15 mhz.. or wider..

channel spacing of 1 hz...

Any thoughts?

Larry ve3fxq




  #3   Report Post  
Old June 14th 05, 07:29 PM
larry
 
Posts: n/a
Default

Thanks..
Larry


"xpyttl" wrote in message
...
Because of the availability of examples, the AD9850 is probably the

simplest
to use. But some of the newer AD chips will give you cleaner output.

They
get there with higher frequency oscillators, though, which translates into
more power. Most folks clock the 9850 at 100 or 120 MHz. Canned 100 MHz
oscillators tend to be pretty power hungry. The 9850 also gets hungry as
the clock goes up. At least some of the newer synth chips use less power,
but I don't know what you can do about 400 MHz clocks.

TI has some VHF/UHF chips that I know some folks have run as low as 50

MHz.
These use a crystal in the 20 MHz range instead of an external clock and

are
pretty reasonably priced. If your objective is to go into a mixer, then

you
could divide down a UHF synth to get to your 5-15 neighborhood.

..

"larry" wrote in message
...
Greetings..

I am looking for a frequency synthesizer chip that will have an output
anywhere from 5 mhz to 15 mhz.. or wider..

channel spacing of 1 hz...

Any thoughts?

Larry ve3fxq






Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Drake TR-3 transceiver synthesizer upgrade Gene Gardner Homebrew 2 January 15th 04 02:17 AM
Drake TR-3 transceiver synthesizer upgrade Gene Gardner Homebrew 0 January 13th 04 05:28 PM
Manson Labs R-390A synthesizer Byron Tatum Boatanchors 0 January 9th 04 01:39 AM
Update Manson Labs GRC-129 Synthesizer Byron Tatum Swap 0 November 9th 03 02:18 AM
Manson Labs GRC-129 Synthesizer Byron Tatum Swap 0 November 7th 03 09:15 PM


All times are GMT +1. The time now is 09:11 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017