You know, I finally get set up to be able to operate on HF from my
apartment by using CW and the in-the-mud signal digital modes such as
PSK31, 10 and Hell and what do you know this trash-hash comes along!
It is bad enough that I had to deal with light dimmers!
The general public is the most ignorant political animal that has to
be fed for votes. Politicians dread having to go into any type of
teaching mode and they hardly ever bother being educated themselves.
"My constituents" does not include YOU! You weirdo strange noise radio
tuning person!
The politicians are too lazy to take the time to explain to the big
companies that this sceme is harmful to HF reception, that they have
to take the expense to build the infrastrucure of a shielded type of
system. This is the easy way out. The people must have their bread and
circuses. I used to care about the general public until I realized
that they tend to crap where they all eat. Perhaps they don't even
deserve our efforts to help them if they allow this to go through.
It is thumbs down time as we are about to be fed to the lions. It is
all fun and games till someone loses an eye as they said in Rome.
I am going to write my politician if only for amusement purposes.

Anthony WW2W

Subject: [DX] How to File BPL Comments with the FCC
Several suggested I summarize how to do this:

1. Go to http://gullfoss2.fcc.gov/prod/ecfs/upload_v2.cgi
2. Enter only 03-104 in Box 1 (Proceeding).
3. Complete all required boxes (2, 3, 7, 8, 9, 10 & 12)
4. Attach your file in .doc, .pdf, .xls, etc in the first large
box and click "Sent Attached File to FCC".

OR...and much easier for shorter comments,

5. Type your comments directly into the bottom large box,
keeping 70 characters per line, and click "Send Brief
Comments to FCC".

After 4. or 5., another screen should appear where you need to
click "Finish Transaction and Receive Confirmation". If you
did everything correctly, you should then receive a confirmation
number on the next screen. If you don't see the confirmation
number, your comments were not submitted correctly.

Your comments will likely not appear until the next
business day since it takes them awhile to process everything.
Please DO comment before the August 20 window closes! This
could be the most important thing you will ever do to ensure we
do not allow the FCC fill our bands with interference.

"BadWsky" wrote in message
...
The politicians are too lazy to take the time to explain to the big
companies that this sceme is harmful to HF reception, that they have
to take the expense to build the infrastrucure of a shielded type of
system.

SNIP

I am going to write my politician if only for amusement purposes.

Anthony WW2W

Subject: [DX] How to File BPL Comments with the FCC
Several suggested I summarize how to do this:

1. Go to http://gullfoss2.fcc.gov/prod/ecfs/upload_v2.cgi
2. Enter only 03-104 in Box 1 (Proceeding).
3. Complete all required boxes (2, 3, 7, 8, 9, 10 & 12)
4. Attach your file in .doc, .pdf, .xls, etc in the first large
box and click "Sent Attached File to FCC".

OR...and much easier for shorter comments,

5. Type your comments directly into the bottom large box,
keeping 70 characters per line, and click "Send Brief
Comments to FCC".

After 4. or 5., another screen should appear where you need to
click "Finish Transaction and Receive Confirmation". If you
did everything correctly, you should then receive a confirmation
number on the next screen. If you don't see the confirmation
number, your comments were not submitted correctly.

Your comments will likely not appear until the next
business day since it takes them awhile to process everything.
Please DO comment before the August 20 window closes! This
could be the most important thing you will ever do to ensure we
do not allow the FCC fill our bands with interference.

"BadWsky" wrote in message
...
The politicians are too lazy to take the time to explain to the big
companies that this sceme is harmful to HF reception, that they have
to take the expense to build the infrastrucure of a shielded type of
system.

SNIP

I am going to write my politician if only for amusement purposes.

Anthony WW2W