RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Digital (https://www.radiobanter.com/digital/)
-   -   AMPR Info (https://www.radiobanter.com/digital/8179-ampr-info.html)

Jim November 12th 03 08:20 PM

AMPR Info
 
There's some poop in all the help:

1) The latest AMPR coordinators are at: http://noh.ucsd.edu/~brian/amprnets.txt
(which if you can't remember, it's on the www.ampr.org page)
The one in the FTP directory is obsolete (for some reason, bad script probably).

2) To make changes to the robot, the address is:
If you use anything else it will produce heat only.

Good luck,
Jim

Hank Oredson November 12th 03 11:57 PM


"Jim" wrote in message
om...
There's some poop in all the help:

1) The latest AMPR coordinators are at:

http://noh.ucsd.edu/~brian/amprnets.txt
(which if you can't remember, it's on the www.ampr.org page)
The one in the FTP directory is obsolete (for some reason, bad script

probably).

No contact information, and in the case of the coordinators
for this area, no action when one does figure out how to contact them.

2) To make changes to the robot, the address is:
If you use anything else it will produce heat only.


I've tried it a couple times, and it appeared to work, but the
information was reset back to the old (and incorrect) information
within a day or so. If you have some info on how one might
cause the robot to do something useful, that would be much
appreciated.

How would one go about getting a new coordinator?
We have several volunteers for that job, but to date zero
response to requests for info on how to make it happen.

--

... Hank

Hank:
http://horedson.home.att.net
W0RLI: http://w0rli.home.att.net



Hank Oredson November 12th 03 11:57 PM


"Jim" wrote in message
om...
There's some poop in all the help:

1) The latest AMPR coordinators are at:

http://noh.ucsd.edu/~brian/amprnets.txt
(which if you can't remember, it's on the www.ampr.org page)
The one in the FTP directory is obsolete (for some reason, bad script

probably).

No contact information, and in the case of the coordinators
for this area, no action when one does figure out how to contact them.

2) To make changes to the robot, the address is:
If you use anything else it will produce heat only.


I've tried it a couple times, and it appeared to work, but the
information was reset back to the old (and incorrect) information
within a day or so. If you have some info on how one might
cause the robot to do something useful, that would be much
appreciated.

How would one go about getting a new coordinator?
We have several volunteers for that job, but to date zero
response to requests for info on how to make it happen.

--

... Hank

Hank:
http://horedson.home.att.net
W0RLI: http://w0rli.home.att.net




All times are GMT +1. The time now is 04:05 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com