Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 12th 03, 08:20 PM
Jim
 
Posts: n/a
Default AMPR Info

There's some poop in all the help:

1) The latest AMPR coordinators are at: http://noh.ucsd.edu/~brian/amprnets.txt
(which if you can't remember, it's on the www.ampr.org page)
The one in the FTP directory is obsolete (for some reason, bad script probably).

2) To make changes to the robot, the address is:
If you use anything else it will produce heat only.

Good luck,
Jim
  #2   Report Post  
Old November 12th 03, 11:57 PM
Hank Oredson
 
Posts: n/a
Default


"Jim" wrote in message
om...
There's some poop in all the help:

1) The latest AMPR coordinators are at:

http://noh.ucsd.edu/~brian/amprnets.txt
(which if you can't remember, it's on the www.ampr.org page)
The one in the FTP directory is obsolete (for some reason, bad script

probably).

No contact information, and in the case of the coordinators
for this area, no action when one does figure out how to contact them.

2) To make changes to the robot, the address is:
If you use anything else it will produce heat only.


I've tried it a couple times, and it appeared to work, but the
information was reset back to the old (and incorrect) information
within a day or so. If you have some info on how one might
cause the robot to do something useful, that would be much
appreciated.

How would one go about getting a new coordinator?
We have several volunteers for that job, but to date zero
response to requests for info on how to make it happen.

--

... Hank

Hank:
http://horedson.home.att.net
W0RLI: http://w0rli.home.att.net


  #3   Report Post  
Old November 12th 03, 11:57 PM
Hank Oredson
 
Posts: n/a
Default


"Jim" wrote in message
om...
There's some poop in all the help:

1) The latest AMPR coordinators are at:

http://noh.ucsd.edu/~brian/amprnets.txt
(which if you can't remember, it's on the www.ampr.org page)
The one in the FTP directory is obsolete (for some reason, bad script

probably).

No contact information, and in the case of the coordinators
for this area, no action when one does figure out how to contact them.

2) To make changes to the robot, the address is:
If you use anything else it will produce heat only.


I've tried it a couple times, and it appeared to work, but the
information was reset back to the old (and incorrect) information
within a day or so. If you have some info on how one might
cause the robot to do something useful, that would be much
appreciated.

How would one go about getting a new coordinator?
We have several volunteers for that job, but to date zero
response to requests for info on how to make it happen.

--

... Hank

Hank:
http://horedson.home.att.net
W0RLI: http://w0rli.home.att.net


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Any info on WJ-8690 Receiver? al Boatanchors 1 July 11th 04 12:14 PM
Lattin antenna.............more info sources Lee Carkenord Antenna 33 April 23rd 04 06:03 PM
Info needed Scanman Boatanchors 0 January 10th 04 10:44 PM
Gotham Antenna info needed Keyboard In The Wilderness Antenna 4 December 5th 03 04:09 PM
Vee Beam info needed W5DXP Antenna 5 August 6th 03 07:39 AM


All times are GMT +1. The time now is 11:22 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017