Home |
Search |
Today's Posts |
#1
|
|||
|
|||
BPQ and FBB with win95 - was PK232, DSP232, and F6FBB
Thanks for the reply Steve.
I've corrected the 9600 port speed. It was correct at 4800 but I reconfigured the tnc to 9600 now. bpqconfig file reflects this too. I'm getting confused at all the "ports"... Lets deal with BPQ seperate... as I think this is where the problem lies. It just can't seem to see the tnc. Here is the relevant entry in the config file... ; The basic format is: ; ; TNCPORT ; COM=n ; COMBIOS port number ; APPLMASK=nn ; Defaults to 1 (BBS) ; APPLFLAGS=nn ; Defaults to 6 ; ENDPORT ; ; ; Dont try to define more than 16 ports. ; TNCPORT COM=1 ENDPORT ; ; AX25 PORT DEFINITIONS ; ; PORT ID=144.950 Mhz 1200 Baud TYPE=ASYNC PROTOCOL=KISS IOADDR=3F8H INTLEVEL=4 SPEED=9600 CHANNEL=A QUALITY=10 MAXFRAME=2 TXDELAY=500 SLOTTIME=100 PERSIST=64 FULLDUP=0 FRACK=7000 RESPTIME=2000 RETRIES=10 PACLEN=120 ENDPORT The TNC is on com1 3F8H irq 4 - standard settings. The tnc works fine under windows hyperterm direct to com1. I run BPQCODE from the autoexec before windows starts... all is ok...no errors.. Also a BPQ info message pops up before windows boot ... all seems normal. Am I missing something here ? Thanks, Doz "Steve" wrote in message ... In article , (Doz) wrote: I have both software installed - latest Winfbb and BPQ 4.08b (with ll's) - onto a windows 95 osr2 box Not used WinFBB, the last version I ran was 5.15, but hey, I'll give anything a go ! ;-) However... I don't have a clue on the routes... ports.. virtual or otherwise!? The tnc is a tiny2 in kiss mode and can be accessed from windows using Hyperterminal. What are you seeing, it should be complete gibberish.??? BPQ ; For Version 4.08 ; ; ; Configuration Options ; BBS=1 ; INCLUDE BBS SUPPORT NODE=0 ; INCLUDE SWITCH SUPPORT ; Are you sure ??? I had mine set to NODE=1 PORT ID=144.950 Mhz 1200 Baud TYPE=ASYNC PROTOCOL=KISS IOADDR=3F8H INTLEVEL=4 SPEED=4800 really...? 9k6 is the norm. CHANNEL=A QUALITY=10 MAXFRAME=2 TXDELAY=500 SLOTTIME=100 PERSIST=64 FULLDUP=0 FRACK=7000 RESPTIME=2000 RETRIES=10 PACLEN=120 ENDPORT everything else looks in order. I'll load up mine and compare a little later when I've had caffeine and nicotine ;-) BTW, you DID compile the bqgcfg.txt didn't you ;-) HTH - Steve |
#2
|
|||
|
|||
Thanks for the reply Steve.
I've corrected the 9600 port speed. It was correct at 4800 but I reconfigured the tnc to 9600 now. bpqconfig file reflects this too. I'm getting confused at all the "ports"... Lets deal with BPQ seperate... as I think this is where the problem lies. It just can't seem to see the tnc. Here is the relevant entry in the config file... ; The basic format is: ; ; TNCPORT ; COM=n ; COMBIOS port number ; APPLMASK=nn ; Defaults to 1 (BBS) ; APPLFLAGS=nn ; Defaults to 6 ; ENDPORT ; ; ; Dont try to define more than 16 ports. ; TNCPORT COM=1 ENDPORT ; ; AX25 PORT DEFINITIONS ; ; PORT ID=144.950 Mhz 1200 Baud TYPE=ASYNC PROTOCOL=KISS IOADDR=3F8H INTLEVEL=4 SPEED=9600 CHANNEL=A QUALITY=10 MAXFRAME=2 TXDELAY=500 SLOTTIME=100 PERSIST=64 FULLDUP=0 FRACK=7000 RESPTIME=2000 RETRIES=10 PACLEN=120 ENDPORT The TNC is on com1 3F8H irq 4 - standard settings. The tnc works fine under windows hyperterm direct to com1. I run BPQCODE from the autoexec before windows starts... all is ok...no errors.. Also a BPQ info message pops up before windows boot ... all seems normal. Am I missing something here ? Thanks, Doz "Steve" wrote in message ... In article , (Doz) wrote: I have both software installed - latest Winfbb and BPQ 4.08b (with ll's) - onto a windows 95 osr2 box Not used WinFBB, the last version I ran was 5.15, but hey, I'll give anything a go ! ;-) However... I don't have a clue on the routes... ports.. virtual or otherwise!? The tnc is a tiny2 in kiss mode and can be accessed from windows using Hyperterminal. What are you seeing, it should be complete gibberish.??? BPQ ; For Version 4.08 ; ; ; Configuration Options ; BBS=1 ; INCLUDE BBS SUPPORT NODE=0 ; INCLUDE SWITCH SUPPORT ; Are you sure ??? I had mine set to NODE=1 PORT ID=144.950 Mhz 1200 Baud TYPE=ASYNC PROTOCOL=KISS IOADDR=3F8H INTLEVEL=4 SPEED=4800 really...? 9k6 is the norm. CHANNEL=A QUALITY=10 MAXFRAME=2 TXDELAY=500 SLOTTIME=100 PERSIST=64 FULLDUP=0 FRACK=7000 RESPTIME=2000 RETRIES=10 PACLEN=120 ENDPORT everything else looks in order. I'll load up mine and compare a little later when I've had caffeine and nicotine ;-) BTW, you DID compile the bqgcfg.txt didn't you ;-) HTH - Steve |
#3
|
|||
|
|||
|
#4
|
|||
|
|||
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|