| Home |
| Search |
| Today's Posts |
|
#2
November 19th 06, 11:48 PM
posted to rec.radio.shortwave,rec.radio.amateur.equipment,rec.radio.amateur.misc
|
|||
|
|||
Ten-Tec RX340 Spectrum Display?
Somebody Somewhere wrote: Is there a stand-alone, or PC software-based, RF spectrum display that can interface with the 455khz IF output of a Ten-Tec RX340? I don't really want PC control of the RX340, just a spectrum display. Thanks. I don't think this is likely since you would need an A/D samping around a megahertz, which isn't stock hardware on a PC. There are SDRs that will give you a panoramic display on your PC. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Spectrum display for R-5000 | Shortwave | |||
| America Need Unchained Spectrum | CB | |||
| No More Technology Jail USA With Bandwidth-Based Spectrum Management | Policy | |||
| How Things Work ; FCC Spectrum Laws | Shortwave | |||
| How Things Work ; FCC Spectrum Laws | Broadcasting | |||
Threaded Mode
