MFJ-929 and a Yaesu FT-857
 

Try to connect a MFJ-929 and a Yaesu FT-857. Use a MFJ-5114Y cable to
connect.
Which parameter should I select on both for start tuning process by push the
tune button on tuner?

When select tuner on transceiver and the right transceiver selected on tuner
nothing happens.

73

Ralf, DL2MRB
--
Vy 73 es 55 de Ralf, DL2MRB

MFJ-929 and a Yaesu FT-857
 

In article 1390022.ghXzVc9c8P@viviana,
Ralf Ballis - DL2MRB wrote:

Try to connect a MFJ-929 and a Yaesu FT-857. Use a MFJ-5114Y cable to
connect.

Which parameter should I select on both for start tuning process by push the
tune button on tuner?

You'll need to inform the FT-857 that it has a CAT-compatible tuner
attached. Check your owner's manual. If I recall correctly, there
are two menu items that you'll need to set. One of them tells the
radio that there's a slave CAT device attached, and the other tells it
to talk to a tuner via the CAT port.

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

MFJ-929 and a Yaesu FT-857
 

Thank you for answering.

Dave Platt wrote:

One*of*them*tells*the
radio that there's a slave CAT device attached, and the other tells it
to talk to a tuner via the CAT port.

When I select a tuner on FT-857 options, CAT type option turn automatically
to tuner and isn't changeable.

Since I try to connect and several options on this tuner, think I notice a
burned smell coming out from this tuner.
Works normally, maybe some device burned down by using any wrong option on
this MFJ-929.

73

Ralf, DL2MRB
--
Vy 73 es 55 de Ralf, DL2MRB