Kenwood TM-2550A trouble

September 4th 03, 07:58 PM

Claudio Adra

Posts: n/a

Kenwood TM-2550A trouble

I have a trouble with my old TM-2550A.
When I turn it on, the unit does not show the display, only the red TX
light turn on without pressing any button, even PTT.
I tried to reset the CPU shorting the two pins located on the lower
board. Also, I measured the CPU battery backup, showing 3,2 V aprox.
(after 15 years?).
Then, I test the pwr and has no output (0 W).
Any ideas, and an schematic diagram would be well appreciated.
Claudio - LU3CFA

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fs: Kenwood kpt50 repeater radio programmer	Skipp has Kenwood stuff	Equipment	2	June 16th 06 05:22 PM
FS: Gonset, National, Heathkit, Kenwood and More!	Dave Hollander	Boatanchors	0	December 2nd 03 05:08 AM
FS: Kenwood Mikes and Transceive Cable for Twins	Dave Hollander	Boatanchors	0	November 25th 03 03:33 AM
Kenwood TM-2550A trouble	Claudio Adra	Equipment	4	October 8th 03 12:01 AM
fs: Kenwood kpt50 repeater radio programmer	Skipp has Kenwood stuff	Equipment	0	August 7th 03 07:16 PM

All times are GMT +1. The time now is 09:46 AM.

Menu

About Us