RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Equipment (https://www.radiobanter.com/equipment/)
-   -   FT 890 problem (https://www.radiobanter.com/equipment/114771-ft-890-problem.html)

George Folse III February 4th 07 05:36 PM

FT 890 problem
 
I sent my FT 890 to Yaseu for repairs about a yr. ago because lighting hit it and knocked the rec out The TX was working fine when I sent it. I never tried it out until now because I use it as a spare. The rec works fine now the TX is only 40 watts in all modes. I called Yaseu about this and they told me the no longer repair the older model radios anymore, that I would have to find someone else to repair it. My question is does anyone have a clue on what them might have done to lower the rf power? I would like to try and repair it myself before trying to get someone else to do it. I have already spend more money on it than it is worth. Any help on this????
Thanks

--
George K5WWO

Nate Bargmann February 5th 07 06:42 PM

FT 890 problem
 
On Sun, 04 Feb 2007 11:36:26 -0600, George Folse III wrote:

I sent my FT 890 to Yaseu for repairs about a yr. ago because lighting
hit it and knocked the rec out The TX was working fine when I sent it. I
never tried it out until now because I use it as a spare. The rec works
fine now the TX is only 40 watts in all modes. I called Yaseu about this
and they told me the no longer repair the older model radios anymore,
that I would have to find someone else to repair it. My question is does
anyone have a clue on what them might have done to lower the rf power? I
would like to try and repair it myself before trying to get someone else
to do it. I have already spend more money on it than it is worth. Any
help on this???? Thanks


Perhaps it became mis-adjusted. If you don't have a service manual
(technical supplement in Yaesu speak) you should be able to snag a copy
from http://mods.dk

- Nate

--

"The optimist proclaims that we live in the best of all possible worlds,
the pessimist fears this is true."

Edward L. Dowdy February 9th 07 12:36 AM

FT 890 problem
 
There is also a low power switch on one of the circuit boards. It switches
it to a 50 watt output max. Might (a big might) be the problem. It's been a
few years since I used an 890. I don't recall exactly what board it's on.

73,
Ed KA9EES

"Nate Bargmann" wrote in message
et...
On Sun, 04 Feb 2007 11:36:26 -0600, George Folse III wrote:

I sent my FT 890 to Yaseu for repairs about a yr. ago because lighting
hit it and knocked the rec out The TX was working fine when I sent it. I
never tried it out until now because I use it as a spare. The rec works
fine now the TX is only 40 watts in all modes. I called Yaseu about this
and they told me the no longer repair the older model radios anymore,
that I would have to find someone else to repair it. My question is does
anyone have a clue on what them might have done to lower the rf power? I
would like to try and repair it myself before trying to get someone else
to do it. I have already spend more money on it than it is worth. Any
help on this???? Thanks


Perhaps it became mis-adjusted. If you don't have a service manual
(technical supplement in Yaesu speak) you should be able to snag a copy
from http://mods.dk

- Nate

--

"The optimist proclaims that we live in the best of all possible worlds,
the pessimist fears this is true."





All times are GMT +1. The time now is 11:11 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com