| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
I need an adapter to use a dynamic mic on a condenser mic radio.
Thanx Steve |
|
#2
|
|||
|
|||
|
Put a 3 mfd electrolytic capacitor in series with the audio plus line to
block the DC from the dynamic microphone. If you are also looking for gain, that is a different matter. KA9CAR "Fumper" wrote in message ... I need an adapter to use a dynamic mic on a condenser mic radio. Thanx Steve |
|
#3
|
|||
|
|||
|
Put a 3 mfd electrolytic capacitor in series with the audio plus line to
block the DC from the dynamic microphone. If you are also looking for gain, that is a different matter. KA9CAR "Fumper" wrote in message ... I need an adapter to use a dynamic mic on a condenser mic radio. Thanx Steve |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: sma-to-bnc custom fit rubber covered antenna adapter | Antenna | |||
| Easy SSB Adapter for R-390A | Boatanchors | |||
| Adapter needed | Boatanchors | |||
| HW-101 Microphone Recommendations Sought | Equipment | |||
| HW-101 Microphone Recommendations Sought | Equipment | |||