TS820S Help w/ display problem ZS6BTP
 

Hi. My display has gone berserk. When set on known freq.7.000, for example,
the display reads 7117.1.

As I move up freq., the .x digit jumps by 2, ie, to 7117.3

On 20 meters, the reading is 15xxx.x throughout the bands. There are other
such anomalies. Operations otherwise seems OK.

Does Kenwood has a tech support URL?
Any thoughts greatly appreciated.

Pse respond to

Don Bryant

"

Don, go to the IF board on left side of chassis..on the board top/right corner there is a small trimmer...while watching the readout,adjust the trimmer and when it peaks the readout will fix itself..that is usually the problem with 820 ..GL W4PQW

"

Don, go to the IF board on left side of chassis..on the board top/right corner there is a small trimmer...while watching the readout,adjust the trimmer and when it peaks the readout will fix itself..that is usually the problem with 820 ..GL W4PQW