Yaesu FT-301 - INFO wanted
Hi, I have a Yaesu FT-301D - digital hf rig.
Here is the problem... the rig works great but the digital display does not work properly. The display will only read out the following when on... example. 80m reads 3.000.0, 40m 7.000.0 20m, 14.000.0 and so on When I turn the dial the frequency displayed stays the same. No change or any attempt to change its reading. Ive checked the connections to the display boards, all looks ok.. As I mentioend the rig works fine except for this. Any suggestions ? 73 Mike VE3MKX |
Yaesu FT-301 - INFO wanted
The FT-301D had a few issues with the digital display -- one which was
overheating. Post at Fox Tango (Yaesu User's Group) http://foxtango.org/foxtango001.htm Carol Maher is moderator and likely has the troubleshooting info you need. gb "Mike VE3MKX" wrote in message ups.com... Hi, I have a Yaesu FT-301D - digital hf rig. Here is the problem... the rig works great but the digital display does not work properly. The display will only read out the following when on... example. 80m reads 3.000.0, 40m 7.000.0 20m, 14.000.0 and so on When I turn the dial the frequency displayed stays the same. No change or any attempt to change its reading. Ive checked the connections to the display boards, all looks ok.. As I mentioend the rig works fine except for this. Any suggestions ? 73 Mike VE3MKX |
All times are GMT +1. The time now is 08:50 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com