Hi, I have a Yaesu FT-301D - digital hf rig.

Here is the problem... the rig works great but the digital display
does not work properly.
The display will only read out the following when on... example. 80m
reads 3.000.0, 40m 7.000.0 20m, 14.000.0 and so on When I turn the
dial the frequency displayed stays the same. No change or any attempt
to change its reading.
Ive checked the connections to the display boards, all looks ok.. As
I mentioend the rig works fine except for this.
Any suggestions ?

73 Mike
VE3MKX

The FT-301D had a few issues with the digital display -- one which was
overheating.

Post at Fox Tango (Yaesu User's Group)
http://foxtango.org/foxtango001.htm

Carol Maher is moderator and likely has the troubleshooting info you need.

gb

"Mike VE3MKX" wrote in message
ups.com...
Hi, I have a Yaesu FT-301D - digital hf rig.

Here is the problem... the rig works great but the digital display
does not work properly.
The display will only read out the following when on... example. 80m
reads 3.000.0, 40m 7.000.0 20m, 14.000.0 and so on When I turn the
dial the frequency displayed stays the same. No change or any attempt
to change its reading.
Ive checked the connections to the display boards, all looks ok.. As
I mentioend the rig works fine except for this.
Any suggestions ?

73 Mike
VE3MKX