Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 16th 03, 02:56 PM
Dave Edwards
 
Posts: n/a
Default

Rich....
I just replaced the meter lamp in my TR751A, and got another 751A with dead
bulbs... so I'll be doing it again.
You can play games with LEDs and dropping resistors, or jam something from
Radio Shack in there...
Or order the correct bulbs from Kenwood. The correct bulbs have a thin green
cover over the bulb to provide the correct color.
Part number from Kenwood parts (east or west, find them on Kenwood's
website)
is 830-0845-05.
Order a few, and stash them away. They are used in a few other Kenwood rigs.
The front panel comes off easily. You need to remove the knobs, and if I
remember
correctly, there is a hex nut (metric) on the tuning knob.
After you take the top and bottom shells off the radio, and the knobs, there
are a few screws
on the left and right that allow you to tilt the front panel forwards to get
to the bulbs.
Good Luck!!!
....Dave

"Richard Donahue" wrote in message
...
I have a Kenwood TR-751A and the light is out. The LCD and meter isn't lit
up anymore. I believe the last trip I took it was knocked out.

I took the front cover off and couldn't see a bulb anywhere. Does anyone
know where it's located and what I can use to replace it? You can e-mail

me
at

Thanks in advance.

Rich KCØCHJ




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with TR-751A backlit LCD Richard Donahue Boatanchors 4 November 26th 03 03:54 AM


All times are GMT +1. The time now is 08:30 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017