| Home |
| Search |
| Today's Posts |
|
|
|
#1
December 3rd 03, 01:26 PM
|
|||
|
|||
What would your local police think about this?
http://www.astrosurf.com/lombry/qsl-badge.htm
What's next, a .44 replica with your call sign engraved on it? |
|
#2
December 13th 03, 09:34 PM
|
|||
|
|||
|
Thank you for reading my request
I have a Yaesu FT-757GXII All was going fine until my Main Tuning Dial started getting very hard to turn.CW and CCW It just totally seized up on me Never had this happen before This has nothing to do with the tension adjusting screw or the Electronic Frequency Lock switch Has anyone ever encountered this... ???? Please advise Thank you....John |
|
#3
December 14th 03, 01:00 AM
|
|||
|
|||
|
I have a Yaesu FT-757GXII All was going fine until my Main Tuning
Dial started getting very hard to turn.CW and CCW It just totally seized up on me Never had this happen before This has nothing to do with the tension adjusting screw or the Electronic Frequency Lock switch Has anyone ever encountered this... ???? Please advise Thank you....John Mine did the same thing. I pulled the knob off and put some penetrating oil on the shaft. Kroil was the name brand as it does not setup and get gummy after a week or so like some will. let it sit a day or so and put some pliers on the shaft and turned it. It finally loosened back up. Works fine after a couple of years now. |
|
#4
December 14th 03, 01:00 AM
|
|||
|
|||
|
I have a Yaesu FT-757GXII All was going fine until my Main Tuning
Dial started getting very hard to turn.CW and CCW It just totally seized up on me Never had this happen before This has nothing to do with the tension adjusting screw or the Electronic Frequency Lock switch Has anyone ever encountered this... ???? Please advise Thank you....John Mine did the same thing. I pulled the knob off and put some penetrating oil on the shaft. Kroil was the name brand as it does not setup and get gummy after a week or so like some will. let it sit a day or so and put some pliers on the shaft and turned it. It finally loosened back up. Works fine after a couple of years now. |
|
#5
December 13th 03, 09:34 PM
|
|||
|
|||
|
Thank you for reading my request
I have a Yaesu FT-757GXII All was going fine until my Main Tuning Dial started getting very hard to turn.CW and CCW It just totally seized up on me Never had this happen before This has nothing to do with the tension adjusting screw or the Electronic Frequency Lock switch Has anyone ever encountered this... ???? Please advise Thank you....John |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Command Receiver Local Tuning Knob | Boatanchors | |||
| FS Collins S-Line (local MD-DC-VA) | Boatanchors | |||
| FS: HQ-180 and NC-300 LOCAL SEATTLE PICKUP ONLY | Boatanchors | |||
| FS: HQ-180 and NC-300 LOCAL SEATTLE PICKUP ONLY | Boatanchors | |||
| Looking for LOCAL buyer to buy lots of my radios! | Boatanchors | |||
Hybrid Mode
